90 FR 153 pgs. 38745-38751 - Crystalline Silicon Photovoltaic Cells, Whether or Not Assembled Into Modules, From India, Indonesia, and the Lao People's Democratic Republic: Initiation of Countervailing Duty Investigations
Type: NOTICEVolume: 90Number: 153Pages: 38745 - 38751
Pages: 38745, 38746, 38747, 38748, 38749, 38750, 38751Docket number: [C-533-943, C-560-847, C-553-004]
FR document: [FR Doc. 2025-15251 Filed 8-11-25; 8:45 am]
Agency: Commerce Department
Sub Agency: International Trade Administration
Official PDF Version: PDF Version
[top]
DEPARTMENT OF COMMERCE
International Trade Administration
[C-533-943, C-560-847, C-553-004]
Crystalline Silicon Photovoltaic Cells, Whether or Not Assembled Into Modules, From India, Indonesia, and the Lao People's Democratic Republic: Initiation of Countervailing Duty Investigations
AGENCY:
Enforcement and Compliance, International Trade Administration, Department of Commerce.
DATES:
Applicable August 6, 2025.
FOR FURTHER INFORMATION CONTACT:
Amber Hodak at (202) 482-8034 (India), Ted Pearson at (202) 482-2631 (Indonesia), and Shane Subler at (202) 482-6241 (the Lao People's Democratic Republic (Laos)), AD/CVD Operations, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230.
[top]
SUPPLEMENTARY INFORMATION:
The Petitions
On July 17, 2025, the U.S. Department of Commerce (Commerce) received countervailing duty (CVD) petitions concerning imports of crystalline silicon photovoltaic cells, whether or not assembled into modules (solar cells), from India, Indonesia, and Laos filed in proper form on behalf of the Alliance for American Solar Manufacturing and Trade (the petitioner). 1 The CVD Petitions were accompanied by antidumping duty (AD) petitions concerning imports of imports of solar cells from India, Indonesia, and Laos. 2
Footnotes:
1 ? See Petitioner's Letter, "Petitions for the Imposition of Antidumping and Countervailing Duties," dated July 17, 2025 (Petitions). The individual members of the Alliance for American Solar Manufacturing and Trade are First Solar, Inc., Hanwha Q CELLS USA, Inc. (Qcells), and Mission Solar Energy LLC (Mission Solar).
2 ? Id.
On July 21 and 22, 2025, Commerce requested supplemental information pertaining to certain aspects of the Petitions in supplemental questionnaires. 3 On July 23 and 24, 2025, the petitioner filed timely responses to these requests for additional information. 4
Footnotes:
3 ? See Commerce's Letters, "Supplemental Questions," dated July 21, 2025 (General Issues Questionnaire), Country-Specific CVD Supplemental Questionnaires: India CVD Supplemental, Indonesia CVD Supplemental, and Laos CVD Supplemental, dated July 22, 2025.
4 ? See Petitioner's Letters, "Response to the 1st Supplemental Questionnaire Regarding Common Issues and Injury Volume I of the Petition," dated July 23, 2025 (General Issues Supplement); see also "Country-Specific CVD Supplemental Responses: India CVD Supplement," "Indonesia CVD Supplement," and "Laos CVD Supplement," dated July 24, 2025.
In accordance with section 702(b)(1) of the Tariff Act of 1930, as amended (the Act), the petitioner alleges that the Government of India (GOI), Government of Indonesia (GOIN), and Government of Laos (GOL) (collectively, Governments) are providing countervailable subsidies, within the meaning of sections 701 and 771(5) of the Act, to producers of solar cells in India, Indonesia, and Laos, and that such imports are materially injuring, or threatening material injury to, the domestic industry producing solar cells in the United States. Consistent with section 702(b)(1) of the Act and 19 CFR 351.202(b), for those alleged programs on which we are initiating CVD investigations, the Petitions were accompanied by information reasonably available to the petitioner supporting its allegations.
Commerce finds that the petitioner filed the Petitions on behalf of the domestic industry, because the petitioner is an interested party, as defined in section 771(9)(F) of the Act. 5 Commerce also finds that the petitioner demonstrated sufficient industry support with respect to the initiation of the requested CVD investigations. 6
Footnotes:
5 ?The Alliance is an association, the majority of whose members are producers of the domestic like product. Individual members of the Alliance (QCells and Mission Solar) are interested parties within the meaning of section 771(9)(C) of the Act. See Petitions at Volume I (page 2).
6 ? See section on "Determination of Industry Support for the Petitions," infra.
Periods of Investigation
Because the Petitions were filed on July 17, 2025, the periods of investigation for the India, Indonesia, and Laos CVD investigations are January 1, 2024, through December 31, 2024. 7
Footnotes:
7 ? See 19 CFR 351.204(b)(2).
Scope of the Investigations
The products covered by these investigations are solar cells from India, Indonesia, and Laos. For a full description of the scope of these investigations, see the appendix to this notice.
Comments on the Scope of the Investigations
On July 21, 2025, Commerce requested information and clarification from the petitioner regarding the proposed scope to ensure that the scope language in the Petitions is an accurate reflection of the products for which the domestic industry is seeking relief. 8 On July 23, 2025, the petitioner provided clarifications and revised the scope. 9 The description of merchandise covered by these investigations, as described in the appendix to this notice, reflects these clarifications.
Footnotes:
8 ? See General Issues Questionnaire at 3-4.
9 ? See General Issues Supplement at 2-8.
As discussed in the Preamble to Commerce's regulations, we are setting aside a period for interested parties to raise issues regarding product coverage ( i.e., scope). 10 Commerce will consider all comments received from interested parties and, if necessary, will consult with interested parties prior to the issuance of the preliminary determinations. If scope comments include factual information, 11 all such factual information should be limited to public information. Commerce requests that interested parties provide at the beginning of their scope comments a public executive summary for each comment or issue raised in their submission. Commerce further requests that interested parties limit their public executive summary of each comment or issue to no more than 450 words, not including citations. Commerce intends to use the public executive summaries as the basis of the comment summaries included in the analysis of scope comments. To facilitate preparation of its questionnaires, Commerce requests that scope comments be submitted by 5:00 p.m. Eastern Time (ET) on August 26, 2025, which is 20 calendar days from the signature date of this notice. Any rebuttal comments, which may include factual information, and should also be limited to public information, must be filed by 5:00 p.m. ET on September 5, 2025, which is 10 calendar days from the initial comment deadline.
Footnotes:
10 ? See Antidumping Duties; Countervailing Duties; Final Rule, 62 FR 27296, 27323 (May 19, 1997) ( Preamble ).
11 ? See 19 CFR 351.102(b)(21) (defining "factual information").
Commerce requests that any factual information that parties consider relevant to the scope of these investigations be submitted during that time period. However, if a party subsequently finds that additional factual information pertaining to the scope of the investigations may be relevant, the party must contact Commerce and request permission to submit the additional information. All scope comments must be filed simultaneously on the records of the concurrent AD and CVD investigations.
Filing Requirements
All submissions to Commerce must be filed electronically via Enforcement and Compliance's Antidumping Duty and Countervailing Duty Centralized Electronic Service System (ACCESS), unless an exception applies. 12 An electronically filed document must be received successfully in its entirety by the time and date it is due.
Footnotes:
12 ? See Antidumping and Countervailing Duty Proceedings: Electronic Filing Procedures; Administrative Protective Order Procedures, 76 FR 39263 (July 6, 2011); see also Enforcement and Compliance; Change of Electronic Filing System Name, 79 FR 69046 (November 20, 2014), for details of Commerce's electronic filing requirements, effective August 5, 2011. Information on using ACCESS can be found at https://access.trade.gov/help.aspx and a handbook can be found at https://access.trade.gov/help/Handbook_on_Electronic_Filing_Procedures.pdf.
Consultations
[top] Pursuant to sections 702(b)(4)(A)(i) and (ii) of the Act, Commerce notified the GOI, GOIN, and GOL of the receipt of the Petitions and provided an opportunity for consultations with respect to the Petitions. 13 Commerce held consultations with the GOI on July
Footnotes:
13 ? See Commerce's Letters, "Invitation for Consultations to Discuss the Countervailing Duty Petition," dated July 17, 2025.
14 ? See Memorandum, "Consultations with the Government of India," dated August 1, 2025; see also GOI's Letter, "GOI's Pre-Initiation Comments and Consultation Note," dated August 5, 2025.
15 ? See Memorandum, "Consultations with the Government of Laos," dated August 5, 2025.
16 ? See Memorandum, "Consultations with the Government of Indonesia," dated August 6, 2025.
Determination of Industry Support for the Petitions
Section 702(b)(1) of the Act requires that a petition be filed on behalf of the domestic industry. Section 702(c)(4)(A) of the Act provides that a petition meets this requirement if the domestic producers or workers who support the petition account for: (i) at least 25 percent of the total production of the domestic like product; and (ii) more than 50 percent of the production of the domestic like product produced by that portion of the industry expressing support for, or opposition to, the petition. Moreover, section 702(c)(4)(D) of the Act provides that, if the petition does not establish support of domestic producers or workers accounting for more than 50 percent of the total production of the domestic like product, Commerce shall: (i) poll the industry or rely on other information in order to determine if there is support for the petition, as required by subparagraph (A); or (ii) determine industry support using a statistically valid sampling method to poll the "industry."
Section 771(4)(A) of the Act defines the "industry" as the producers as a whole of a domestic like product. Thus, to determine whether a petition has the requisite industry support, the statute directs Commerce to look to producers and workers who produce the domestic like product. The U.S. International Trade Commission (ITC), which is responsible for determining whether "the domestic industry" has been injured, must also determine what constitutes a domestic like product in order to define the industry. While both Commerce and the ITC must apply the same statutory definition regarding the domestic like product, 17 they do so for different purposes and pursuant to a separate and distinct authority. In addition, Commerce's determination is subject to limitations of time and information. Although this may result in different definitions of the like product, such differences do not render the decision of either agency contrary to law. 18
Footnotes:
17 ? See section 771(10) of the Act.
18 ? See USEC, Inc. v. United States, 132 F. Supp. 2d 1, 8 (CIT 2001) (citing Algoma Steel Corp., Ltd. v. United States, 688 F. Supp. 639, 644 (CIT 1988), aff'd Algoma Steel Corp., Ltd. v. United States, 865 F.2d 240 (Fed. Cir. 1989)).
Section 771(10) of the Act defines the domestic like product as "a product which is like, or in the absence of like, most similar in characteristics and uses with, the article subject to an investigation under this title." Thus, the reference point from which the domestic like product analysis begins is "the article subject to an investigation" ( i.e., the class or kind of merchandise to be investigated, which normally will be the scope as defined in the petition).
With regard to the domestic like product, the petitioner does not offer a definition of the domestic like product distinct from the scope of the investigations. 19 Based on our analysis of the information submitted on the record, we have determined that solar cells, as defined in the scope, constitute a single domestic like product, and we have analyzed industry support in terms of that domestic like product. 20
Footnotes:
19 ?For a discussion of the domestic like product analysis as applied to these cases and information regarding industry support, see Checklists, "Countervailing Duty Investigation Initiation Checklists: Crystalline Silicon Photovoltaic Cells, Whether or Not Assembled into Modules, from India, Indonesia, and the Lao People's Democratic Republic," dated concurrently with, and hereby adopted by, this notice (Country-Specific CVD Initiation Checklists), at Attachment II, Analysis of Industry Support for the Antidumping and Countervailing Duty Petitions Covering Crystalline Silicon Photovoltaic Cells, Whether or Not Assembled into Modules, from India, Indonesia, and the Lao People's Democratic Republic (Attachment II). These checklists are on file electronically via ACCESS.
20 ?For further discussion, see Attachment II of the Country-Specific CVD Initiation Checklists.
In determining whether the petitioner has standing under section 702(c)(4)(A) of the Act, we considered the industry support data contained in the Petitions with reference to the domestic like product as defined in the "Scope of the Investigations," in the appendix to this notice. To establish industry support, the petitioner provided the 2024 production of the domestic like product for the U.S. producers that support the Petitions and compared this to the estimated total U.S. production of the domestic like product by the entire U.S. solar cells industry. 21 We relied on data provided by the petitioner for purposes of measuring industry support. 22
Footnotes:
21 ? Id.
22 ? Id.
On July 30, 2025, we received timely filed comments on industry support from Illuminate USA LLC (Illuminate), a U.S. producer of the domestic like product. 23 On July 30, 2025, we also received timely filed comments on industry support from a group of U.S. producers: Canadian Solar US Module Manufacturing Corporation (Canadian Solar), Heliene USA Inc. (Heliene), and Silfab Solar WA (Silfab). 24 On August 1, 2025, the petitioner responded to the comments from Illuminate, Canadian Solar, Heliene and Silfab in a timely filed rebuttal submission. 25
Footnotes:
23 ? See Illuminate's Letter, "Illuminate Request to Poll the Domestic Industry," dated July 30, 2025.
24 ? See Letter from Canadian Solar, Heliene, and Silfab, "Request to Poll the Industry," dated July 30, 2025.
25 ? See Petitioner's Letter, "Alliance's Rebuttal Comments to Parties Industry Polling Requests," dated August 1, 2025 (Petitioner's Rebuttal).
Our review of the data provided in the Petitions, the General Issues Supplement, Petitioner's Rebuttal, and other information readily available to Commerce indicates that the petitioner has established industry support for the Petitions. 26 First, the Petitions established support from domestic producers (or workers) accounting for more than 50 percent of the total production of the domestic like product and, as such, Commerce is not required to take further action in order to evaluate industry support ( e.g., polling). 27 Second, the domestic producers (or workers) have met the statutory criteria for industry support under section 702(c)(4)(A)(i) of the Act because the domestic producers (or workers) who support the Petitions account for at least 25 percent of the total production of the domestic like product. 28 Finally, the domestic producers (or workers) have met the statutory criteria for industry support under section 702(c)(4)(A)(ii) of the Act because the domestic producers (or workers) who support the Petitions account for more than 50 percent of the production of the domestic like product produced by that portion of the industry expressing support for, or opposition to, the Petitions. 29 Accordingly, Commerce determines that the Petitions were filed on behalf of the domestic industry within the meaning of section 702(b)(1) of the Act. 30
Footnotes:
26 ? See Attachment II of the Country-Specific CVD Initiation Checklists.
27 ? Id.; see also section 702(c)(4)(D) of the Act.
28 ? See Attachment II of the Country-Specific CVD Initiation Checklists.
29 ? Id.
30 ? Id.
Injury Test
[top] Because India, Indonesia, and Laos are "Subsidies Agreement Countries" within the meaning of section 701(b) of the Act, section 701(a)(2) of the Act applies to these investigations. Accordingly, the ITC must determine whether imports of the subject merchandise from India, Indonesia, and/or Laos materially injure, or
Allegations and Evidence of Material Injury and Causation
The petitioner alleges that imports of the subject merchandise are benefiting from countervailable subsidies and that such imports are causing, or threaten to cause, material injury to the U.S. industry producing the domestic like product. In addition, the petitioner alleges that subject imports from India, Indonesia, and Laos individually exceed the negligibility threshold provided for under section 771(24)(A) of the Act. 31
Footnotes:
31 ?For further discussion, see Country-Specific AD Initiation Checklists at Attachment III, Analysis of Allegations and Evidence of Material Injury and Causation for the Antidumping and Countervailing Duty Petitions Covering Crystalline Silicon Photovoltaic Cells, Whether or Not Assembled into Modules, from India, Indonesia, and the Lao People's Democratic Republic (Attachment III).
The petitioner contends that the industry's injured condition is illustrated by the significant volume of subject imports, reduced market share, underselling and price depression and/or suppression, lost sales and revenues, declines in the domestic industry's production, shipments, capacity utilization, delays or retraction of the domestic industry's expansion plans and negative impact on employment and financial performance. 32 We assessed the allegations and supporting evidence regarding material injury, threat of material injury, causation, cumulation, as well as negligibility, and we have determined that these allegations are properly supported by adequate evidence, and meet the statutory requirements for initiation. 33
Footnotes:
32 ? See Attachment III of the Country-Specific AD Initiation Checklists.
33 ? Id.
Initiation of CVD Investigations
Based upon the examination of the Petitions and supplemental responses, we find that they meet the requirements of section 702 of the Act. Therefore, we are initiating CVD investigations to determine whether imports of solar cells from India, Indonesia, and Laos benefit from countervailable subsidies conferred by the GOI, GOIN, and GOL, respectively. In accordance with section 703(b)(1) of the Act and 19 CFR 351.205(b)(1), unless postponed, we will make our preliminary determinations no later than 65 days after the date of this initiation.
India
Based on our review of the Petitions, we find that there is sufficient information to initiate a CVD investigation on 84 programs alleged by the petitioner. For a full discussion of the basis for our decision to initiate on each program, see the India CVD Initiation Checklist. A public version of the initiation checklist for this investigation is available on ACCESS.
Indonesia
Based on our review of the Petitions, we find that there is sufficient information to initiate a CVD investigation on 23 programs alleged by the petitioner. For a full discussion of the basis for our decision to initiate on each program, see the Indonesia CVD Initiation Checklist. A public version of the initiation checklist for this investigation is available on ACCESS.
Laos
Based on our review of the Petitions, we find that there is sufficient information to initiate a CVD investigation on 20 programs alleged by the petitioner. For a full discussion of the basis for our decision to initiate on each program, see the Laos CVD Initiation Checklist. A public version of the initiation checklist for this investigation is available on ACCESS.
Respondent Selection
India, Indonesia, Laos
In the Petitions, the petitioner identified 43 companies in India, 54 companies in Indonesia, and eight companies in Laos as producers and/or exporters of solar cells. 34 Commerce intends to follow its standard practice in CVD investigations and calculate company-specific subsidy rates in the investigations. Following standard practice in CVD investigations, in the event Commerce determines that the number of companies is large, and it cannot individually examine each company based upon Commerce's resources, where appropriate, Commerce intends to select mandatory respondents based on U.S. Customs and Border Protection (CBP) data for imports under the appropriate Harmonized Tariff Schedule of the United States (HTSUS) subheading(s) listed in the "Scope of the Investigations," in the appendix.
Footnotes:
34 ? See Petitions at Volume I (page 18 and Exhibit I-18); see also General Issues Supplement at 1-2 and Exhibit I-Supp-1.
On August 5, 2025, Commerce released CBP data on imports of solar cells from India, Indonesia, and Laos under administrative protective order (APO) to all parties with access to information protected by APO and indicated that interested parties wishing to comment on CBP data and/or respondent selection must do so within three business days of the publication date of the notice of initiation of these investigations. 35 Comments must be filed electronically using ACCESS. An electronically filed document must be received successfully in its entirety via ACCESS by 5:00 p.m. ET on the specified deadline. Commerce will not accept rebuttal comments regarding the CBP data or respondent selection.
Footnotes:
35 ? See Country-Specific Memoranda, "Release of U.S. Customs and Border Protection Entry Data," dated August 5, 2025.
Interested parties must submit applications for disclosure under APO in accordance with 19 CFR 351.305(b). Instructions for filing such applications may be found on Commerce's website at https://www.trade.gov/administrative-protective-orders .
Distribution of Copies of the Petitions
In accordance with section 702(b)(4)(A) of the Act and 19 CFR 351.202(f), a copy of the public version of the Petitions has been provided to the GOI, GOIN, and GOL via ACCESS. To the extent practicable, we will attempt to provide a copy of the public version of the Petitions to each exporter named in the Petitions, as provided under 19 CFR 351.203(c)(2).
ITC Notification
Commerce will notify the ITC of its initiation, as required by section 702(d) of the Act.
Preliminary Determinations by the ITC
The ITC will preliminarily determine, within 45 days after the date on which the Petitions were filed, whether there is a reasonable indication that imports of solar cells from India, Indonesia, and/or Laos are materially injuring, or threatening material injury to, a U.S. industry. 36 A negative ITC determination for any country will result in the investigation being terminated with respect to that country. 37 Otherwise, these CVD investigations will proceed according to statutory and regulatory time limits.
Footnotes:
36 ? See section 703(a)(1) of the Act.
37 ? Id.
Submission of Factual Information
[top] Factual information is defined in 19 CFR 351.102(b)(21) as: (i) evidence submitted in response to questionnaires; (ii) evidence submitted in support of allegations; (iii) publicly available information to value factors of production under 19 CFR 351.408(c) or to measure the adequacy of remuneration under 19 CFR 351.511(a)(2); (iv) evidence placed on the record by Commerce; and (v) evidence other than factual information
Footnotes:
38 ? See 19 CFR 351.301(b).
39 ? See 19 CFR 351.301(b)(2).
Extensions of Time Limits
Parties may request an extension of time limits before the expiration of a time limit established under 19 CFR 351.301, or as otherwise specified by Commerce. In general, an extension request will be considered untimely if it is filed after the expiration of the time limit established under 19 CFR 351.301, or as otherwise specified by Commerce. 40 For submissions that are due from multiple parties simultaneously, an extension request will be considered untimely if it is filed after 10:00 a.m. ET on the due date. Under certain circumstances, Commerce may elect to specify a different time limit by which extension requests will be considered untimely for submissions which are due from multiple parties simultaneously. In such a case, we will inform parties in a letter or memorandum of the deadline (including a specified time) by which extension requests must be filed to be considered timely. An extension request must be made in a separate, standalone submission; under limited circumstances we will grant untimely filed requests for the extension of time limits, where we determine, based on 19 CFR 351.302, that extraordinary circumstances exist. Parties should review Commerce's regulations concerning the extension of time limits and the Time Limits Final Rule prior to submitting factual information in these investigations. 41
Footnotes:
40 ? See 19 CFR 351.301; see also Extension of Time Limits; Final Rule, 78 FR 57790 (September 20, 2013) ( Time Limits Final Rule ), available at https://www.gpo.gov/fdsys/pkg/FR-2013-09-20/html/2013-22853.htm.
41 ? See 19 CFR 351.302; see also, e.g., Time Limits Final Rule.
Certification Requirements
Any party submitting factual information in an AD or CVD proceeding must certify to the accuracy and completeness of that information. 42 Parties must use the certification formats provided in 19 CFR 351.303(g). 43 Commerce intends to reject factual submissions if the submitting party does not comply with the applicable certification requirements.
Footnotes:
42 ? See section 782(b) of the Act.
43 ? See Certification of Factual Information to Import Administration During Antidumping and Countervailing Duty Proceedings, 78 FR 42678 (July 17, 2013) ( Final Rule ); see also frequently asked questions regarding the Final Rule, available at https://enforcement.trade.gov/tlei/notices/factual_info_final_rule_FAQ_07172013.pdf .
Notification to Interested Parties
Interested parties must submit applications for disclosure under APO in accordance with 19 CFR 351.305. Parties wishing to participate in these investigations should ensure that they meet the requirements of 19 CFR 351.103(d) ( e.g., by filing the required letters of appearance). Note that Commerce has amended certain of its requirements pertaining to the service of documents in 19 CFR 351.303(f). 44
Footnotes:
44 ? See Administrative Protective Order, Service, and Other Procedures in Antidumping and Countervailing Duty Proceedings, 88 FR 67069 (September 29, 2023).
This notice is issued and published pursuant to sections 702 and 777(i) of the Act, and 19 CFR 351.203(c).
Dated: August 6, 2025.
Abdelali Elouaradia,
Deputy Assistant Secretary for Enforcement and Compliance.
Appendix
Scope of the Investigations
The merchandise covered by these investigations is crystalline silicon photovoltaic cells, and modules, laminates, and panels, consisting of crystalline silicon photovoltaic cells, whether or not partially or fully assembled into other products, including, but not limited to, modules, laminates, panels and building integrated materials.
These investigations cover crystalline silicon photovoltaic cells of thickness equal to or greater than 20 micrometers, having a p/n junction formed by any means, whether or not the cell has undergone other processing, including, but not limited to, cleaning, etching, coating, and/or addition of materials (including, but not limited to, metallization and conductor patterns) to collect and forward the electricity that is generated by the cell.
Merchandise under consideration may be described at the time of importation as parts for final finished products that are assembled after importation, including, but not limited to, modules, laminates, panels, building-integrated modules, building integrated panels, or other finished goods kits. Such parts that otherwise meet the definition of merchandise under consideration are included in the scope of the investigations.
Excluded from the scope of the investigations are thin film photovoltaic products produced from amorphous silicon (a-Si), cadmium telluride (CdTe), or copper indium gallium selenide (CIGS).
Also excluded from the scope of the investigations are crystalline silicon photovoltaic cells, not exceeding 10,000 mm 2 in surface area, that are permanently integrated into a consumer good whose function is other than power generation and that consumes the electricity generated by the integrated crystalline silicon photovoltaic cell. Where more than one cell is permanently integrated into a consumer good, the surface area for purposes of this exclusion shall be the total combined surface area of all cells that are integrated into the consumer good.
Additionally, excluded from the scope of the investigations are panels with surface area from 3,450 mm 2 to 33,782 mm 2 with one black wire and one red wire (each of type 22 AWG or 24 AWG not more than 206 mm in length when measured from panel extrusion), and not exceeding 2.9 volts, 1.1 amps, and 3.19 watts. For the purposes of this exclusion, no panel shall contain an internal battery or external computer peripheral ports.
Also excluded from the scope of the investigations are:
(1) Off grid CSPV panels in rigid form with a glass cover, with the following characteristics: (A) a total power output of 100 watts or less per panel; (B) a maximum surface area of 8,000 cm 2 per panel; (C) do not include a built-in inverter; (D) must include a permanently connected wire that terminates in either an 8 mm male barrel connector, or a two-port rectangular connector with two pins in square housings of different colors; (E) must include visible parallel grid collector metallic wire lines every 1-4 millimeters across each solar cell; and (F) must be in individual retail packaging (for purposes of this provision, retail packaging typically includes graphics, the product name, its description and/or features, and foam for transport); and
(2) Off grid CSPV panels without a glass cover, with the following characteristics: (A) a total power output of 100 watts or less per panel; (B) a maximum surface area of 8,000 cm 2 per panel; (C) do not include a built-in inverter; (D) must include visible parallel grid collector metallic wire lines every 1-4 millimeters across each solar cell; and (E) each panel is (1) permanently integrated into a consumer good; (2) encased in a laminated material without stitching, or (3) has all of the following characteristics: (i) the panel is encased in sewn fabric with visible stitching, (ii) includes a mesh zippered storage pocket, and (iii) includes a permanently attached wire that terminates in a female USB-A connector.
[top] In addition, the following CSPV panels are excluded from the scope of the investigations: off-grid CSPV panels in rigid form with a glass cover, with each of the
Additionally excluded from the scope of these investigations are off-grid small portable crystalline silicon photovoltaic panels, with or without a glass cover, with the following characteristics: (1) a total power output of 200 watts or less per panel; (2) a maximum surface area of 16,000 cm 2 per panel; (3) no built-in inverter; (4) an integrated handle or a handle attached to the package for ease of carry; (5) one or more integrated kickstands for easy installation or angle adjustment; and (6) a wire of not less than 3 meters either permanently connected or attached to the package that terminates in an 8 mm diameter male barrel connector.
Also excluded from the scope of these investigations are off-grid crystalline silicon photovoltaic panels in rigid form with a glass cover, with each of the following physical characteristics, whether or not assembled into a fully completed off-grid hydropanel whose function is conversion of water vapor into liquid water: (A) a total power output of no more than 180 watts per panel at 155 degrees Celsius; (B) a surface area of less than 16,000 square centimeters (cm 2 ) per panel; (C) include a keep-out area of approximately 1,200 cm 2 around the edges of the panel that does not contain solar cells; (D) do not include a built-in inverter; (E) do not have a frame around the edges of the panel; (F) include a clear glass back panel; (G) must include a permanently connected wire that terminates in a two-port rounded rectangular, sealed connector; (H) include a thermistor installed into the permanently connected wire before the twoport connector; and (I) include exposed positive and negative terminals at opposite ends of the panel, not enclosed in a junction box.
Further excluded from the scope of the investigations are:
(1) Off grid rigid CSPV panels with a glass cover, with the following characteristics: (A) a total power output of 200 watts or less per panel, (B) a maximum surface area of 10,500 cm 2 per panel, (C) do not include a built-in inverter, (D) must include a permanently connected wire that terminates in waterproof connector with a cylindrical positive electrode and a rectangular negative electrode with the positive and negative electrodes having an interlocking structure, (E) must include visible parallel grid collector metallic wire lines every 1-4 millimeters across each solar cell, and (F) must be in individual retail packaging (for purposes of this provision, retail packaging typically includes graphics, the product name, its description and/or features); and
(2) Off-grid small portable crystalline silicon photovoltaic panels, with or without a glass cover, with the following characteristics: (A) a total power output of 200 watts or less per panel, (B) a maximum surface area of 16,000 cm 2 per panel, (C) no built-in inverter, (D) an integrated handle or a handle attached to the package for ease of carry, (E) one or more integrated kickstands for easy installation or angle adjustment, and (F) a wire either permanently connected or attached to the package terminates in waterproof connector with a cylindrical positive electrode and a rectangular negative electrode with the positive and negative electrodes having an interlocking structure.
Also excluded from the scope of the investigations are:
(1) Off grid rigid CSPV panels with a glass cover, with the following characteristics: (A) a total power output of 200 watts or less per panel, (B) a maximum surface area of 10,500 cm 2 per panel, (C) do not include a built-in inverter, (D) must include a permanently connected wire that terminates in waterproof connector with a cylindrical positive electrode and a rectangular negative electrode with the positive and negative electrodes having an interlocking structure, (E) must include visible parallel grid collector metallic wire lines every 1-4 millimeters across each solar cell, and (F) must be in individual retail packaging (for purposes of this provision, retail packaging typically includes graphics, the product name, its description and/or features); and
(2) Small off-grid panels with glass cover, with the following characteristics: (A) surface area from 3,450 mm 2 to 33,782 mm 2 , (B) with one black wire and one red wire (each of type 22AWG or 28 AWG not more than 350 mm in length when measured from panel extrusion), (C) not exceeding 10 volts, (D) not exceeding 1.1 amps, (E) not exceeding 6 watts, and (F) for the purposes of this exclusion, no panel shall contain an internal battery or external computer peripheral ports.
Additionally excluded from the scope of the investigations are:
(1) Off grid rigid CSPV panels with a glass cover, with the following characteristics: (A) a total power output of 175 watts or less per panel, (B) a maximum surface area of 9,000 cm 2 per panel, (C) do not include a built-in inverter, (D) must include a permanently connected wire that terminates in waterproof connector with a cylindrical positive electrode and a rectangular negative electrode with the positive and negative electrodes having an interlocking structure; (E) must include visible parallel grid collector metallic wire lines every 1-4 millimeters across each solar cell, and (F) must be in individual retail packaging (for purposes of this provision, retail packaging typically includes graphics, the product name, its description and/or features); and
(2) Off grid CSPV panels without a glass cover, with the following characteristics, (A) a total power output of 220 watts or less per panel, (B) a maximum surface area of 16,000 cm 2 per panel, (C) do not include a built-in inverter, (D) must include visible parallel grid collector metallic wire lines every 1-4 millimeters across each solar cell, and (E) each panel is encased in a laminated material without stitching.
Also excluded from the scope of these investigations are off-grid CSPV panels in rigid form, with or without a glass cover, permanently attached to an aluminum extrusion that is an integral component of an automation device that controls natural light, whether or not assembled into a fully completed automation device that controls natural light, with the following characteristics:
(1) a total power output of 20 watts or less per panel;
(2) a maximum surface area of 1,000 cm 2 per panel;
(3) does not include a built-in inverter for powering third party devices.
Modules, laminates, and panels produced in a third-country from cells produced in a subject country are covered by the investigations; however, modules, laminates, and panels produced in a subject country from cells produced in a third-country are not covered by the investigations.
Also excluded from the scope of these investigations are all products covered by the scope of the antidumping and countervailing duty orders on Crystalline Silicon Photovoltaic Cells, Whether or Not Assembled into Modules, from the People's Republic of China: Amended Final Determination of Sales at Less Than Fair Value, and Antidumping Order, 77 FR 73018 (December 7, 2012); and Crystalline Silicon Photovoltaic Cells, Whether or Not Assembled into Modules, from the People's Republic of China: Countervailing Duty Order, 77 FR 73017 (December 7, 2012).
Also excluded from the scope of these investigations are all products covered by the scope of the antidumping and countervailing duty orders on Crystalline Silicon Photovoltaic Cells, Whether or Not Assembled into Modules from the Socialist Republic of Vietnam: Amended Final Antidumping Duty Determination; Crystalline Silicon Photovoltaic Cells, Whether or Not Assembled into Modules from Cambodia, Malaysia, Thailand, and the Socialist Republic of Vietnam: Antidumping duty Orders, 90 FR 26786 (June 24, 2025); Crystalline Silicon Photovoltaic Cells, Whether or Not Assembled into Modules from the Socialist Republic of Vietnam: Amended Final Antidumping Duty Determination; Crystalline Silicon Photovoltaic Cells, Whether or Not Assembled into Modules from Cambodia, Malaysia, Thailand, and the Socialist Republic of Vietnam: Antidumping Duty Orders; Correction, 90 FR 29843 (July 7, 2025); and Crystalline Silicon Photovoltaic Cells, Whether or Not Assembled into Modules, from Malaysia and Thailand: Amended Final Countervailing Duty Determinations; Crystalline Silicon Photovoltaic Cells, Whether or Not Assembled into Modules, from Cambodia, Malaysia, Thailand, and the Socialist Republic of Vietnam: Countervailing Duty Orders, 90 FR 26791 (June 24, 2025).
[top] Merchandise covered by the investigations is currently classified in the Harmonized Tariff System of the United States (HTSUS) under subheadings 8541.42.0010 and 8541.43.0010. Imports of the subject merchandise may enter under HTSUS subheadings 8501.71.0000, 8501.72.1000, 8501.72.2000, 8501.72.3000, 8501.72.9000,
[FR Doc. 2025-15251 Filed 8-11-25; 8:45 am]
BILLING CODE 3510-DS-P