90 FR 2 pgs. 268-271 - List of Approved Spent Fuel Storage Casks: NAC International, Inc. MAGNASTOR® Storage System, Certificate of Compliance No. 1031, Amendment No. 14 and Revisions to Amendment Nos. 0 Through 13
Type: PRORULEVolume: 90Number: 2Pages: 268 - 271
Pages: 268, 269, 270, 271Docket number: [NRC-2024-0180]
FR document: [FR Doc. 2024-31096 Filed 1-2-25; 8:45 am]
Agency: Nuclear Regulatory Commission
Official PDF Version: PDF Version
[top]
NUCLEAR REGULATORY COMMISSION
10 CFR Part 72
[NRC-2024-0180]
RIN 3150-AL21
List of Approved Spent Fuel Storage Casks: NAC International, Inc. MAGNASTOR® Storage System, Certificate of Compliance No. 1031, Amendment No. 14 and Revisions to Amendment Nos. 0 Through 13
AGENCY:
Nuclear Regulatory Commission.
ACTION:
Proposed rule.
SUMMARY:
[top] The U.S. Nuclear Regulatory Commission (NRC) is proposing to amend its spent fuel regulations by revising the NAC International, Inc. MAGNASTOR® Storage System listing within the "List of approved spent fuel storage casks" to include Amendment No. 14 and revisions to Amendment Nos. 0 through 13 to Certificate of Compliance No. 1031. Amendment No. 14 and revisions to Amendment Nos. 0
DATES:
Submit comments by February 3, 2025. Comments received after this date will be considered if it is practical to do so, but the NRC is able to ensure consideration only for comments received on or before this date.
ADDRESSES:
Submit your comments, identified by Docket ID NRC-2024-0180, at https://www.regulations.gov. If your material cannot be submitted using https://www.regulations.gov, call or email the individuals listed in the FOR FURTHER INFORMATION CONTACT section of this document for alternate instructions.
You can read a plain language description of this proposed rule at https://www.regulations.gov/docket/NRC-2024-0180. For additional direction on obtaining information and submitting comments, see "Obtaining Information and Submitting Comments" in the SUPPLEMENTARY INFORMATION section of this document.
FOR FURTHER INFORMATION CONTACT:
Irene Wu, Office of Nuclear Material Safety and Safeguards, telephone: 301-415-1951, email: Irene.Wu@nrc.gov, and Nishka Devaser, telephone: 301-415-5196, email: Nishka.Devaser@nrc.gov. Both are staff of the U.S. Nuclear Regulatory Commission, Washington, DC 20555-0001.
SUPPLEMENTARY INFORMATION:
Table of Contents
I. Obtaining Information and Submitting Comments
II. Rulemaking Procedure
III. Background
IV. Plain Writing
V. Availability of Documents
I. Obtaining Information and Submitting Comments
A. Obtaining Information
Please refer to Docket ID NRC-2024-0180 when contacting the NRC about the availability of information for this action. You may obtain publicly available information related to this action by any of the following methods:
• Federal Rulemaking Website: Go to https://www.regulations.gov and search for Docket ID NRC-2024-0180. Address questions about NRC dockets to Helen Chang, telephone: 301-415-3228, email: Helen.Chang@nrc.gov. For technical questions contact the individuals listed in the FOR FURTHER INFORMATION CONTACT section of this document.
• NRC's Agencywide Documents Access and Management System (ADAMS): You may obtain publicly available documents online in the ADAMS Public Documents collection at https://www.nrc.gov/reading-rm/adams.html. To begin the search, select "Begin Web-based ADAMS Search." For problems with ADAMS, please contact the NRC's Public Document Room (PDR) reference staff at 1-800-397-4209, 301-415-4737, or by email to PDR.Resource@nrc.gov. For the convenience of the reader, instructions about obtaining materials referenced in this document are provided in the "Availability of Documents" section.
• NRC's PDR: The PDR, where you may examine and order copies of publicly available documents, is open by appointment. To make an appointment to visit the PDR, please send an email to PDR.Resource@nrc.gov or call 1-800-397-4209 or 301-415-4737, between 8 a.m. and 4 p.m. eastern time, Monday through Friday, except Federal holidays.
B. Submitting Comments
The NRC encourages electronic comment submission through the Federal rulemaking website ( https://www.regulations.gov ). Please include Docket ID NRC-2024-0180 in your comment submission.
The NRC cautions you not to include identifying or contact information that you do not want to be publicly disclosed in your comment submission. The NRC will post all comment submissions at https://www.regulations.gov as well as enter the comment submissions into ADAMS. The NRC does not routinely edit comment submissions to remove identifying or contact information.
If you are requesting or aggregating comments from other persons for submission to the NRC, then you should inform those persons not to include identifying or contact information that they do not want to be publicly disclosed in their comment submission. Your request should state that the NRC does not routinely edit comment submissions to remove such information before making the comment submissions available to the public or entering the comment into ADAMS.
II. Rulemaking Procedure
Because the NRC considers this action to be non-controversial, the NRC is publishing this proposed rule concurrently with a direct final rule in the Rules and Regulations section of this issue of the Federal Register . The direct final rule will become effective on March 19, 2025. However, if the NRC receives any significant adverse comment by February 3, 2025, then the NRC will publish a document that withdraws the direct final rule. If the direct final rule is withdrawn, the NRC will address the comments in a subsequent final rule. In general, absent significant modifications to the proposed revisions requiring republication, the NRC will not initiate a second comment period on this action in the event the direct final rule is withdrawn.
A significant adverse comment is a comment where the commenter explains why the rule would be inappropriate, including challenges to the rule's underlying premise or approach, or would be ineffective or unacceptable without a change. A comment is adverse and significant if:
(1) The comment opposes the rule and provides a reason sufficient to require a substantive response in a notice-and-comment process. For example, a substantive response is required when:
(a) The comment causes the NRC to reevaluate (or reconsider) its position or conduct additional analysis;
(b) The comment raises an issue serious enough to warrant a substantive response to clarify or complete the record; or
(c) The comment raises a relevant issue that was not previously addressed or considered by the NRC.
(2) The comment proposes a change or an addition to the rule, and it is apparent that the rule would be ineffective or unacceptable without incorporation of the change or addition.
(3) The comment causes the NRC to make a change (other than editorial) to the rule.
For a more detailed discussion of the proposed rule changes and associated analyses, see the direct final rule published in the Rules and Regulations section of this issue of the Federal Register .
III. Background
[top] Section 218(a) of the Nuclear Waste Policy Act of 1982, as amended, requires that "[t]he Secretary [of the Department of Energy] shall establish a demonstration program, in cooperation
To implement this mandate, the Commission approved dry storage of spent nuclear fuel in NRC-approved casks under a general license by publishing a final rule that added a new subpart K in part 72 of title 10 of the Code of Federal Regulations (10 CFR) entitled "General License for Storage of Spent Fuel at Power Reactor Sites" (55 FR 29181; July 18, 1990). This rule also established a new subpart L in 10 CFR part 72 entitled "Approval of Spent Fuel Storage Casks," which contains procedures and criteria for obtaining NRC approval of spent fuel storage cask designs. The NRC subsequently issued a final rule on November 21, 2008 (73 FR 70587), that approved the NAC International, Inc. MAGNASTOR® Storage System design and added it to the list of NRC-approved cask designs in §?72.214 as Certificate of Compliance No. 1031.
IV. Plain Writing
The Plain Writing Act of 2010 (Pub. L. 111-274) requires Federal agencies to write documents in a clear, concise, and well-organized manner. The NRC has written this document to be consistent with the Plain Writing Act as well as the Presidential Memorandum, "Plain Language in Government Writing," published June 10, 1998 (63 FR 31885). The NRC requests comment on the proposed rule with respect to clarity and effectiveness of the language used.
V. Availability of Documents
The documents identified in the following table are available to interested persons as indicated.
[top]
| Document | ADAMS accession No./web link/ Federal Register Citation |
|---|---|
| Proposed Certificate of Compliance and Proposed Technical Specifications | |
| Proposed Certificate of Compliance No. 1031, Amendment No. 14 | ML24211A240 |
| Proposed Certificate of Compliance No. 1031, Amendment No. 14, Appendix A: Technical Specifications and Design Features | ML24211A241 |
| Proposed Certificate of Compliance No. 1031, Amendment No. 14, Appendix B: Approved Contents | ML24211A242 |
| Proposed Certificate of Compliance No. 1031, Amendment No. 0, Revision 3 | ML24211A244 |
| Proposed Certificate of Compliance No. 1031, Amendment No. 0, Revision 3, Appendix A: Technical Specifications and Design Features | ML24211A245 |
| Proposed Certificate of Compliance No. 1031, Amendment No. 0, Revision 3, Appendix B: Approved Contents | ML24211A246 |
| Proposed Certificate of Compliance No. 1031, Amendment No. 1, Revision 3 | ML24211A247 |
| Proposed Certificate of Compliance No. 1031, Amendment No. 1, Revision 3, Appendix A: Technical Specifications and Design Features | ML24211A248 |
| Proposed Certificate of Compliance No. 1031, Amendment No. 1, Revision 3, Appendix B: Approved Contents | ML24211A249 |
| Proposed Certificate of Compliance No. 1031, Amendment No. 2, Revision 3 | ML24211A250 |
| Proposed Certificate of Compliance No. 1031, Amendment No. 2, Revision 3, Appendix A: Technical Specifications and Design Features | ML24211A251 |
| Proposed Certificate of Compliance No. 1031, Amendment No. 2, Revision 3, Appendix B: Approved Contents | ML24211A252 |
| Proposed Certificate of Compliance No. 1031, Amendment No. 3, Revision 3 | ML24211A253 |
| Proposed Certificate of Compliance No. 1031, Amendment No. 3, Revision 3, Appendix A: Technical Specifications and Design Features | ML24211A254 |
| Proposed Certificate of Compliance No. 1031, Amendment No. 3, Revision 3, Appendix B: Approved Contents | ML24211A255 |
| Proposed Certificate of Compliance No. 1031, Amendment No. 4, Revision 2 | ML24211A256 |
| Proposed Certificate of Compliance No. 1031, Amendment No. 4, Revision 2, Appendix A: Technical Specifications and Design Features | ML24211A257 |
| Proposed Certificate of Compliance No. 1031, Amendment No. 4, Revision 2, Appendix B: Approved Contents | ML24211A258 |
| Proposed Certificate of Compliance No. 1031, Amendment No. 5, Revision 2 | ML24211A259 |
| Proposed Certificate of Compliance No. 1031, Amendment No. 5, Revision 2, Appendix A: Technical Specifications and Design Features | ML24211A260 |
| Proposed Certificate of Compliance No. 1031, Amendment No. 5, Revision 2, Appendix B: Approved Contents | ML24211A261 |
| Proposed Certificate of Compliance No. 1031, Amendment No. 6, Revision 2 | ML24211A262 |
| Proposed Certificate of Compliance No. 1031, Amendment No. 6, Revision 2, Appendix A: Technical Specifications and Design Features | ML24211A263 |
| Proposed Certificate of Compliance No. 1031, Amendment No. 6, Revision 2, Appendix B: Approved Contents | ML24211A264 |
| Proposed Certificate of Compliance No. 1031, Amendment No. 7, Revision 2 | ML24211A265 |
| Proposed Certificate of Compliance No. 1031, Amendment No. 7, Revision 2, Appendix A: Technical Specifications and Design Features | ML24211A266 |
| Proposed Certificate of Compliance No. 1031, Amendment No. 7, Revision 2, Appendix B: Approved Contents | ML24211A267 |
| Proposed Certificate of Compliance No. 1031, Amendment No. 8, Revision 2 | ML24211A268 |
| Proposed Certificate of Compliance No. 1031, Amendment No. 8, Revision 2, Appendix A: Technical Specifications and Design Features | ML24211A269 |
| Proposed Certificate of Compliance No. 1031, Amendment No. 8, Revision 2, Appendix B: Approved Contents | ML24211A270 |
| Proposed Certificate of Compliance No. 1031, Amendment No. 9, Revision 2 | ML24211A271 |
| Proposed Certificate of Compliance No. 1031, Amendment No. 9, Revision 2, Appendix A: Technical Specifications and Design Features | ML24211A272 |
| Proposed Certificate of Compliance No. 1031, Amendment No. 9, Revision 2, Appendix B: Approved Contents | ML24211A273 |
| Proposed Certificate of Compliance No. 1031, Amendment No. 10, Revision 1 | ML24211A274 |
| Proposed Certificate of Compliance No. 1031, Amendment No. 10, Revision 1, Appendix A: Technical Specifications and Design Features | ML24211A275 |
| Proposed Certificate of Compliance No. 1031, Amendment No. 10, Revision 1, Appendix B: Approved Contents | ML24211A276 |
| Proposed Certificate of Compliance No. 1031, Amendment No. 11, Revision 1 | ML24211A277 |
| Proposed Certificate of Compliance No. 1031, Amendment No. 11, Revision 1, Appendix A: Technical Specifications and Design Features | ML24211A278 |
| Proposed Certificate of Compliance No. 1031, Amendment No. 11, Revision 1, Appendix B: Approved Contents | ML24211A279 |
| Proposed Certificate of Compliance No. 1031, Amendment No. 12, Revision 1 | ML24211A280 |
| Proposed Certificate of Compliance No. 1031, Amendment No. 12, Revision 1, Appendix A: Technical Specifications and Design Features | ML24211A281 |
| Proposed Certificate of Compliance No. 1031, Amendment No. 12, Revision 1, Appendix B: Approved Contents | ML24211A282 |
| Proposed Certificate of Compliance No. 1031, Amendment No. 13, Revision 1 | ML24211A283 |
| Proposed Certificate of Compliance No. 1031, Amendment No. 13, Revision 1, Appendix A: Technical Specifications and Design Features | ML24211A284 |
| Proposed Certificate of Compliance No. 1031, Amendment No. 13, Revision 1, Appendix B: Approved Contents | ML24211A285 |
| Preliminary Safety Evaluation Report, Certificate of Compliance No. 1031, Amendment No. 14 and Revision to Amendment Nos. 0 through 13 | ML24211A243 |
| NAC International, Inc. MAGNASTOR® Storage System Amendment No. 14 and Revisions to Amendment Nos. 0 through 13 Request Documents | |
| NAC International, Inc., Submission of an Amendment Request for the MAGNASTOR® Cask System, Amendment No. 14, dated July 24, 2023 | ML23205A238 |
| NAC International, Inc., Submission of Data Files to Support the NRC Review of MAGNASTOR® Amendment No. 14, dated July 24, 2023 | ML23208A062 |
| NAC International, Inc., Submission of Responses to the NRC Request for Additional Information for MAGNASTOR® Cask System, Amendment No. 14, dated June 26, 2024 | ML24179A071 (package) |
| NAC International, Inc., Supplement to the Amendment Request No. 14 for the MAGNASTOR® Cask System, dated October 18, 2023 | ML23291A167 |
| NAC International, Inc., Supplement to the Amendment Request No. 14 for the MAGNASTOR® Cask System, dated August 6, 2024 | ML24219A227 |
| NAC International, Inc., MAGNASTOR® Cask System Users Certificate of Compliance No. 1031 Amendment Nos. 0 through 9 Intent to Adopt Letters, dated August 4, 2022 | ML22216A110 |
| Other Documents | |
| Rulemaking Memorandum for Amendment No. 14 and Revision to Amendment Nos. 0 through 13 for the MAGNASTOR® Storage System, dated September 20, 2024 | ML24211A239 |
| Final Rule, "Storage of Spent Fuel in NRC-Approved Storage Casks at Power Reactor Sites," published July 18, 1990 | 55 FR 29181 |
| Final Rule, "List of Approved Spent Fuel Storage Casks: MAGNASTOR Addition," published November 21, 2008 | 73 FR 70587 |
| Revision to Policy Statement, "Agreement State Program Policy Statement; Correction," published October 18, 2017 | 82 FR 48535 |
| Presidential Memorandum, "Plain Language in Government Writing," published June 10, 1998 | 63 FR 31885 |
| Regulatory Issue Summary 2017-05, "Administration of 10 CFR Part 72 Certificate of Compliance Corrections and Revisions" | ML17165A183 |
The NRC may post materials related to this document, including public comments, on the Federal rulemaking website at https://www.regulations.gov under Docket ID NRC-2024-0180. In addition, the Federal rulemaking website allows members of the public to receive alerts when changes or additions occur in a docket folder. To subscribe: (1) navigate to the docket folder (NRC-2024-0180); (2) click the "Subscribe" link; and (3) enter an email address and click on the "Subscribe" link.
Dated: December 20, 2024.
For the Nuclear Regulatory Commission.
Mirela Gavrilas,
Executive Director for Operations.
[FR Doc. 2024-31096 Filed 1-2-25; 8:45 am]
BILLING CODE 7590-01-P