89 FR 118 pgs. 51551-51553 - Shipyard Employment Standards; Extension of the Office of Management and Budget's (OMB) Approval of Information Collection (Paperwork) Requirements
Type: NOTICEVolume: 89Number: 118Pages: 51551 - 51553
Pages: 51551, 51552, 51553Docket number: [Docket No. OSHA-2011-0190]
FR document: [FR Doc. 2024-13366 Filed 6-17-24; 8:45 am]
Agency: Labor Department
Sub Agency: Occupational Safety and Health Administration
Official PDF Version: PDF Version
[top]
DEPARTMENT OF LABOR
Occupational Safety and Health Administration
[Docket No. OSHA-2011-0190]
Shipyard Employment Standards; Extension of the Office of Management and Budget's (OMB) Approval of Information Collection (Paperwork) Requirements
AGENCY:
Occupational Safety and Health Administration (OSHA), Labor.
ACTION:
Request for public comments.
SUMMARY:
OSHA solicits public comments concerning the proposal to extend the Office of Management and Budget's (OMB) approval of the information collection requirements specified in the Shipyard Employment Standards. The purpose of the collection of information (paperwork) provisions of the Standards is to reduce worker's risk of death or serious injury by ensuring that equipment has been tested and is in safe operating condition.
DATES:
Comments must be submitted (postmarked, sent, or received) by August 19, 2024.
ADDRESSES:
Electronically: You may submit comments and attachments electronically at https://www.regulations.gov, which is the Federal eRulemaking Portal. Follow the instructions online for submitting comments.
[top] Docket: To read or download comments or other material in the
Instructions: All submissions must include the agency name and OSHA docket number (OSHA-2011-0190) for the Information Collection Request (ICR). OSHA will place all comments, including any personal information, in the public docket, which may be made available online. Therefore, OSHA cautions interested parties about submitting personal information such as social security numbers and birthdates.
For further information on submitting comments, see the "Public Participation" heading in the section of this notice titled SUPPLEMENTARY INFORMATION .
FOR FURTHER INFORMATION CONTACT:
Seleda Perryman, Directorate of Standards and Guidance, OSHA, U.S. Department of Labor; telephone (202) 693-2222.
SUPPLEMENTARY INFORMATION:
I. Background
The Department of Labor, as part of the continuing effort to reduce paperwork and respondent ( i.e., employer) burden, conducts a preclearance consultation program to provide the public with an opportunity to comment on proposed and continuing information collection requirements in accordance with the Paperwork Reduction Act of 1995 (PRA) (44 U.S.C. 3506(c)(2)(A)). This program ensures that information is in the desired format, reporting burden (time and costs) is minimal, the collection instruments are clearly understood, and OSHA's estimate of the information collection burden is accurate. The Occupational Safety and Health Act of 1970 (OSH Act) (29 U.S.C. 651 et seq. ) authorizes information collection by employers as necessary or appropriate for enforcement of the OSH Act or for developing information regarding the causes and prevention of occupational injuries, illnesses, and accidents (29 U.S.C. 657). The OSH Act also requires that OSHA obtain such information with minimum burden upon employers, especially those operating small businesses, and to reduce to the maximum extent feasible unnecessary duplication of effort in obtaining information (29 U.S.C. 657).
The following is a description of the collection of information requirements specified in the Shipyard Employment Standards. The purpose of the collection of information (paperwork) provisions of the standards is to reduce worker's risk of death or serious injury by ensuring that equipment has been tested and is in safe operating condition.
Manila rope and manila-rope slings (paragraph 1915.112(a)(1)) -The employer must ensure that manila rope and manila-rope slings have permanently affixed and legible identification markings as prescribed by the manufacturer that indicate the recommended safe working load for the type(s) of hitch(es) used, the angle upon which it is based, and the number of legs if more than one.
Wire rope and wire-rope slings (paragraph 1915.112(b)(1)(i)) -The employer must ensure that wire rope and wire-rope slings have permanently affixed and legible identification markings as prescribed by the manufacturer that indicate the recommended safe working load for the type(s) of the hitch(es) used, the angle upon which it is based, and the number of legs if more than one.
Chain and chain slings (paragraph 1915.112(c)(1)(i) -The employer must ensure that chain and chain slings have permanently affixed and legible identification markings as prescribed by the manufacturer that indicate the recommended safe working load for the type(s) of hitch(es) used, the angle upon which it is based, and the number of legs if more than one.
Chain and chain slings (paragraph 1915.112(c)(2) -The employer shall visually inspect all slings chains, including end fastenings, before being used on the job, as well as every three months. The inspection shall include inspection for wear, defective welds, deformation, and increase in length or stretch. Each chain shall bear an indication of the month in which it was thoroughly inspected.
Shackles (paragraph 1915.113(a)(1)) -The employer must ensure that shackles have permanently affixed and legible identification markings as prescribed by the manufacturer that indicate the recommended safe working load.
Test Records for Hooks (paragraph 1915.113(b)(1)) -This paragraph requires that the manufacturer's recommendations be followed in determining the safe working loads of the various sizes and types of hooks. If the manufacturer's recommendations are not available, the hook must be tested to twice the intended safe working load before it is initially put into use. The employer must maintain and keep readily available a certification record which includes the date of such test, the signature of the person who performed the test, and an identifier for the hook which was tested.
The records are used to assure that equipment has been properly tested. The records also provide the most efficient means for the compliance officers to determine that an employer is complying with the Standard.
Mobile Crawler or Truck Cranes Used on a Vessel (paragraph 1915.115(c)) -This paragraph requires that the maximum manufacturer's rated safe working loads for the various working radii of the boom and the maximum and minimum radii at which the boom may be safely used with and without outriggers shall be conspicuously posted near the controls and shall be visible to the operator.
Examination and Test Records for Unfired Pressure Vessels (paragraphs 1915.172(b) and (d)) -Paragraph (b) requires that portable, unfired pressure vessels not built to the requirements of the American Society of Mechanical Engineers Boiler and Pressure Vessel Code, Section VIII, Rules for Construction of Unfired Pressure Vessels, 1963 be examined quarterly by a competent person and subjected to a yearly hydrostatic pressure test. A certification record of such examinations and tests shall be maintained as specified by paragraph (d).
II. Special Issues for Comment
OSHA has a particular interest in comments on the following issues:
• Whether the proposed information collection requirements are necessary for the proper performance of the agency's functions to protect workers, including whether the information is useful;
• The accuracy of OSHA's estimate of the burden (time and costs) of the information collection requirements, including the validity of the methodology and assumptions used;
• The quality, utility, and clarity of the information collected; and
• Ways to minimize the burden on employers who must comply; for example, by using automated or other technological information, and transmission techniques.
III. Proposed Actions
[top] OSHA is requesting that OMB extend the approval of the information collection requirements contained in the
OSHA will summarize the comments submitted in response to this notice and will include this summary in the request to OMB to extend the approval of the information collection requirements.
Type of Review: Extension of a currently approved collection.
Title: Shipyard Employment Standard.
OMB Control Number: 1218-0220.
Affected Public: Business or other for-profits.
Number of Respondents: 4,674.
Number of Responses: 24,637.
Frequency of Responses: Varies.
Average Time per Response: Varies.
Estimated Total Burden Hours: 9,538.
Estimated Cost (Operation and Maintenance): $0.
IV. Public Participation-Submission of Comments on this Notice and internet Access to Comments and Submissions
You may submit comments in response to this document as follows: (1) electronically at https://www.regulations.gov, which is the Federal eRulemaking Portal; or (2) by facsimile (fax), if your comments, including attachments, are not longer than 10 pages you may fax them to the OSHA Docket Office at 202-693-1648. All comments, attachments, and other material must identify the agency name and the OSHA docket number for the ICR (OSHA-2011-0190). You may supplement electronic submission by uploading document files electronically.
Comments and submissions are posted without change at https://www.regulations.gov. Therefore, OSHA cautions commenters about submitting personal information such as social security numbers and dates of birth. Although all submissions are listed in the https://www.regulations.gov index, some information ( e.g., copyrighted material) is not publicly available to read or download from this website. All submission, including copyrighted material, are available for inspection and copying at the OSHA Docket Office. Information on using the https://www.regulations.gov website to submit comments and access the docket is available at the website's "User Tips" link.
Contact the OSHA Docket Office at (202) 693-2350, (TTY (877) 889-5627) for information about materials not available from the website, and for assistance in using the internet to locate docket submissions.
V. Authority and Signature
James S. Frederick, Deputy Assistant Secretary of Labor for Occupational Safety and Health, directed the preparation of this notice. The authority for this notice is the Paperwork Reduction Act of 1995 (44 U.S.C. 3506 et seq. ) and Secretary of Labor's Order No. 8-2020 (85 FR 58393).
Signed at Washington, DC, on June 11, 2024.
James S. Frederick,
Deputy Assistant Secretary of Labor for Occupational Safety and Health.
[FR Doc. 2024-13366 Filed 6-17-24; 8:45 am]
BILLING CODE 4510-26-P