89 FR 233 pgs. 96226-96230 - Crystalline Silicon Photovoltaic Cells, Whether or Not Assembled Into Modules, From Cambodia: Affirmative Preliminary Determination of Sales at Less Than Fair Value, Postponement of Final Determination, and Extension of Provisional Measures
Type: NOTICEVolume: 89Number: 233Pages: 96226 - 96230
Pages: 96226, 96227, 96228, 96229, 96230Docket number: [A-555-003]
FR document: [FR Doc. 2024-28402 Filed 12-3-24; 8:45 am]
Agency: Commerce Department
Sub Agency: International Trade Administration
Official PDF Version: PDF Version
[top]
DEPARTMENT OF COMMERCE
International Trade Administration
[A-555-003]
Crystalline Silicon Photovoltaic Cells, Whether or Not Assembled Into Modules, From Cambodia: Affirmative Preliminary Determination of Sales at Less Than Fair Value, Postponement of Final Determination, and Extension of Provisional Measures
AGENCY:
Enforcement and Compliance, International Trade Administration, Department of Commerce.
SUMMARY:
The U.S. Department of Commerce (Commerce) preliminarily determines that crystalline silicon photovoltaic cells, whether or not assembled into modules (solar cells) from Cambodia are being, or are likely to be, sold in the United States at less than fair value (LTFV). The period of investigation (POI) is April 1, 2023, through March 31, 2024. Interested parties are invited to comment on this preliminary determination.
DATES:
Applicable December 4, 2024.
FOR FURTHER INFORMATION CONTACT:
Hermes Pinilla or Joshua Weiner, AD/CVD Operations, Office I, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: (202) 482-3477 or (202) 482-3902 respectively.
SUPPLEMENTARY INFORMATION:
Background
This preliminary determination is made in accordance with section 733(b) of the Tariff Act of 1930, as amended (the Act). Commerce initiated this investigation on May 14, 2024. 1 On July 22, 2024, Commerce tolled certain deadlines in this administrative proceeding by seven days. 2 On September 17, 2024, Commerce postponed the preliminary determination of this investigation until November 27, 2024. 3
Footnotes:
1 ? See Crystalline Silicon Photovoltaic Cells, Whether or Not Assembled into Modules, from Cambodia, Malaysia, Thailand, and the Socialist Republic of Vietnam: Initiation of Less-Than-Fair-Value Investigations, 89 FR 43809 (May 20, 2024) ( Initiation Notice) .
2 ? See Memorandum, "Tolling of Deadlines for Antidumping and Countervailing Duty Proceedings," dated July 22, 2024.
3 ? See Crystalline Silicon Photovoltaic Cells, Whether or Not Assembled Into Modules, From Cambodia, Malaysia, Thailand, and the Socialist Republic of Vietnam: Postponement of Preliminary Determinations in the Less-Than-Fair-Value Investigations, 89 FR 77473 (September 23, 2024).
For a complete description of the events that followed the initiation of this investigation, see the Preliminary Decision Memorandum. 4 A list of topics included in the Preliminary Decision Memorandum is included as Appendix II to this notice. The Preliminary Decision Memorandum is a public document and is on file electronically via Enforcement and Compliance's Antidumping and Countervailing Duty Centralized Electronic Service System (ACCESS). ACCESS is available to registered users at https://access.trade.gov. In addition, a complete version of the Preliminary Decision Memorandum can be accessed directly at https://access.trade.gov/public/FRNoticesListLayout.aspx.
Footnotes:
4 ? See Memorandum, "Decision Memorandum for the Preliminary Affirmative Determination in the Less-Than-Fair-Value Investigation of Crystalline Silicon Photovoltaic Cells, Whether or Not Assembled into Modules, from Cambodia," dated concurrently with, and hereby adopted by, this notice (Preliminary Decision Memorandum).
Scope of the Investigation
[top] The products covered by this investigation are solar cells from Cambodia. For a complete description of
Scope Comments
In accordance with the Preamble to Commerce's regulations, 5 the Initiation Notice set aside a period of time for parties to raise issues regarding product coverage ( i.e., scope). 6 Certain interested parties commented on the scope of the investigation as it appeared in the Initiation Notice. For a summary of product coverage comments and rebuttal responses submitted to the record for this preliminary determination, and accompanying discussion and analysis of all comments timely received, see the Preliminary Scope Decision Memorandum. 7 Commerce is preliminarily modifying the scope language as it appeared in the Initiation Notice, provided in Appendix I to this notice. The deadline for scope-related case and rebuttal briefs is established in the Preliminary Scope Decision Memoranda
Footnotes:
5 ? See Antidumping Duties; Countervailing Duties, Final Rule, 62 FR 27296, 27323 (May 19, 1997) ( Preamble ).
6 ? See Initiation Notice, 89 FR 43810.
7 ? See Memoranda, "Crystalline Silicon Photovoltaic Cells, Whether or Not Assembled into Modules, from Cambodia, Malaysia, and Thailand: Preliminary Scope Decision Memorandum," dated concurrently with this notice and "Crystalline Silicon Photovoltaic Cells, Whether or Not Assembled into Modules from Vietnam," dated concurrently with this notice (collectively, Preliminary Scope Decision Memoranda).
Methodology
Commerce is conducting this investigation in accordance with section 731 of the Act. Pursuant to section 776(a) of the Act, Commerce preliminarily relied upon facts otherwise available to determine estimated weighted-average dumping margins for Hounen Solar Inc. Co. Ltd. (Hounen) and Solar Long PV Tech Cambodia Co. (Solar Long), the mandatory respondents in this investigation because both Hounen and Solar Long withdrew their participation in this investigation. Further, Commerce preliminarily determines that Hounen and Solar Long failed to cooperate by not acting to the best of each of their ability to comply with Commerce's request for information, and Commerce is using an adverse inference in selecting from among the facts otherwise available ( i.e., applying adverse facts available (AFA) to each respondent) in accordance with section 776(b) of the Act. For a full description of the methodology underlying our preliminary determination, see the Preliminary Decision Memorandum.
All-Others Rate
Sections 733(d)(1)(ii) and 735(c)(5)(A) of the Act provide that, in the preliminary determination, Commerce shall determine an estimated weighted-average dumping margin, i.e., all-others rate, for all exporters and producers not individually examined. This rate shall be an amount equal to the weighted average of the estimated weighted-average dumping margins established for exporters or producers individually investigated, excluding any zero and de minimis margins, and any margins determined entirely under section 776 of the Act.
The estimated weighted-average dumping margins in this preliminary determination was determined entirely under section 776 of the Act. In cases where no estimated weighted-average dumping margins other than zero, de minimis, or those determined entirely under section 776 of the Act have been established for individually examined companies, in accordance with section 735(c)(5)(B) of the Act, Commerce typically calculates a simple average of the dumping margins alleged in the petition, and applies the results as the estimated weighted-average dumping margin for all other producers and exporters not individually examined. 8
Footnotes:
8 ? See, e.g., Thermal Paper from Spain: Final Determination of Sales at Less Than Fair Value, 86 FR 54162, 54163 (September 30, 2021).
In the Petition, 9 the American Alliance for Solar Manufacturing Trade Committee (the petitioner) alleged a single estimated dumping margin for Cambodia, 125.37 percent. 10 Therefore, consistent with our practice, for the all-others rate in this investigation, the simple average of the dumping margins alleged in the Petition is 125.37 percent.
Footnotes:
9 ? See Petitioner's Letter, "Crystalline Silicon Photovoltaic Cells, Whether or Not Assembled Into Modules, from Cambodia, Malaysia, Thailand, and the Socialist Republic of Vietnam, Petitions for the Imposition of Antidumping and Countervailing Duties" dated April 24, 2024 (Petition).
10 ? See Initiation Notice, 89 FR 43812.
Preliminary Determination
Commerce preliminarily determines that the following estimated weighted-average dumping margins exist:
| Exporter or producer | Weighted-average dumping margin (percent) | Cash deposit rate (adjusted for subsidy offset(s)) (percent) |
|---|---|---|
| Hounen Solar Inc. Co. Ltd | *?125.37 | 117.12 |
| Solar Long PV Tech Cambodia Co | *?125.37 | 117.12 |
| All Others | 125.37 | 117.12 |
| *?Rate is based on AFA. | ||
Suspension of Liquidation
In accordance with section 733(d)(2) of the Act, Commerce will direct U.S. Customs and Border Protection (CBP) to suspend liquidation of entries of subject merchandise, as described in Appendix I, entered, or withdrawn from warehouse, for consumption, on or after the date of publication of this notice in the Federal Register . Further, pursuant to section 733(d)(1)(B) of the Act and 19 CFR 351.205(d), Commerce will instruct CBP to require a cash deposit equal to the estimated weighted-average dumping margin, as adjusted for export subsidies, as follows: (1) the cash deposit rate either produced or exported by Hounen or Solar Long will be equal to the company-specific, adjusted, estimated weighted-average dumping margin determined in this preliminary determination; (2) if the exporter is not a respondent identified above, but the producer is, then the cash deposit rate will be equal to the company-specific estimated weighted-average dumping margin established for that producer of the subject merchandise; and (3) the cash deposit rate for all other producers and exporters will be equal to the adjusted, all-others estimated weighted-average dumping margin.
[top] Commerce normally adjusts cash deposits for estimated antidumping duties by the amount of export subsidies countervailed in a companion countervailing duty (CVD) proceeding. Accordingly, where Commerce preliminarily made an affirmative determination for countervailable export subsidies, Commerce has offset the estimated weighted-average dumping margin by the appropriate CVD rate. Any such adjusted cash deposit rate
Should provisional measures in the companion CVD investigation expire prior to the expiration of provisional measures in this LTFV investigation, Commerce will direct CBP to begin collecting estimated antidumping duty cash deposits unadjusted for countervailed export subsidies at the time that the provisional CVD measures expire. These suspension of liquidation instructions will remain in effect until further notice.
Disclosure
Normally, Commerce discloses to interested parties the calculations performed in connection with a preliminary determination within five days of any public announcement or, if there is no public announcement, within five days of the date of publication of the notice of preliminary determination in the Federal Register , in accordance with 19 CFR 351.224(b). However, because Commerce preliminarily applied AFA to the individually examined companies in this investigation, in accordance with section 776 of the Act, and the applied AFA rate is based solely on the Petition, there are no calculations to disclose.
Consistent with 19 CFR 351.224(e), Commerce will analyze and, if appropriate, correct any timely allegations of significant ministerial errors by amending the preliminary determination. However, consistent with 19 CFR 351.224(d), Commerce will not consider incomplete allegations that do not address or do not satisfy the significance standard under 19 CFR 351.224(g) following the preliminary determination. Instead, Commerce will address such allegations in the final determination if the ministerial error allegation is included with issues raised in the case briefs or other written comments.
Verification
Because both mandatory respondents in this investigation withdrew their participation and did not act to the best of their ability to provide information requested by Commerce, and Commerce preliminarily determines the mandatory respondents have been uncooperative, Commerce will not conduct verification.
Public Comment
All interested parties will have the opportunity to submit scope case and rebuttal briefs, to allow interested parties to comment on our preliminary scope decision at that time. For all scope case and rebuttal briefs, parties must file identical documents simultaneously on the records of the ongoing LTFV and CVD investigations of solar cells from Cambodia, Malaysia, the Socialist Republic of Vietnam, and Thailand. No new factual information or business proprietary information may be included in either scope case or rebuttal briefs.
Case briefs or other written comments regarding non-scope issues may be submitted to the Assistant Secretary for Enforcement and Compliance no later than 30 days after the date of publication of the preliminary determination. Rebuttal briefs, limited to issues raised in the case briefs, may be filed not later than five days after the date for filing case briefs. 11 Interested parties who submit case briefs or rebuttal briefs in this proceeding must submit: (1) a table of contents listing each issue; and (2) a table of authorities. 12
Footnotes:
11 ? See 19 CFR 351.309(d); see also Administrative Protective Order, Service, and Other Procedures in Antidumping and Countervailing Duty Proceedings, 88 FR 67069, 67077 (September 29, 2023) ( APO and Service Final Rule ).
12 ? See 19 CFR 351.309(c)(2) and (d)(2).
As provided under 19 CFR 351.309(c)(2) and (d)(2), in prior proceedings we have encouraged interested parties to provide an executive summary of their briefs that should be limited to five pages total, including footnotes. In this investigation, we instead request that interested parties provide at the beginning of their briefs a public, executive summary for each issue raised in their briefs. 13 Further, we request that interested parties limit their public executive summary of each issue to no more than 450 words, not including citations. We intend to use the executive summaries as the basis of the comment summaries included in the issues and decision memorandum that will accompany the final determination in this investigation. We request that interested parties include footnotes for relevant citations in the executive summary of each issue. Note that Commerce has amended certain of its requirements pertaining to the service of documents in 19 CFR 351.303(f). 14
Footnotes:
13 ?We use the term "issue" here to describe an argument that Commerce would normally address in a comment of the Issues and Decision Memorandum.
14 ? See APO and Service Final Rule.
Pursuant to 19 CFR 351.310(c), interested parties who wish to request a hearing, limited to issues raised in the case and rebuttal briefs, must submit a written request to the Assistant Secretary for Enforcement and Compliance, U.S. Department of Commerce, within 30 days after the date of publication of this notice. Requests should contain the party's name, address, and telephone number, the number of participants, whether any participant is a foreign national, and a list of the issues to be discussed. If a request for a hearing is made, Commerce intends to hold the hearing at a time and date to be determined. Parties should confirm by telephone the date, time, and location of the hearing two days before the scheduled date.
Postponement of Final Determination and Extension of Provisional Measures
Section 735(a)(2) of the Act provides that a final determination may be postponed until not later than 135 days after the date of the publication of the preliminary determination if, in the event of an affirmative preliminary determination, a request for such postponement is made by exporters who account for a significant proportion of exports of the subject merchandise, or in the event of a negative preliminary determination, a request for such postponement is made by the petitioner. Section 351.210(e)(2) of Commerce's regulations requires that a request by exporters for postponement of the final determination be accompanied by a request for extension of provisional measures from a four-month period to a period not more than six months in duration.
On November 14, 2024, pursuant to 19 CFR 351.210(e), Hounen and Solar Long requested that Commerce postpone the final determination and that provisional measures be extended to a period not to exceed six months. 15 In accordance with section 735(a)(2)(A) of the Act and 19 CFR 351.210(b)(2)(ii), because: (1) the preliminary determination is affirmative; (2) the requesting exporter(s) account(s) for a significant proportion of exports of the subject merchandise; and (3) no compelling reasons for denial exist, Commerce is postponing the final determination and extending the provisional measures from a four-month period to a period not greater than six months. Accordingly, Commerce will make its final determination no later than 135 days after the date of publication of this preliminary determination.
Footnotes:
15 ? See Hounen and Solar Long's Letter, "Request to Postpone Final Determination," dated November 14, 2024.
U.S. International Trade Commission Notification
[top] In accordance with section 733(f) of the Act, Commerce will notify the U.S. International Trade Commission (ITC) of
Notification to Interested Parties
This determination is issued and published in accordance with sections 733(f) and 777(i)(1) of the Act and 19 CFR 351.205(c).
Dated: November 27, 2024.
Abdelali Elouaradia,
Deputy Assistant Secretary for Enforcement and Compliance.
Appendix I
Scope of the Investigation
The merchandise covered by these investigations is crystalline silicon photovoltaic cells, and modules, laminates, and panels, consisting of crystalline silicon photovoltaic cells, whether or not partially or fully assembled into other products, including, but not limited to, modules, laminates, panels and building integrated materials.
These investigations cover crystalline silicon photovoltaic cells of thickness equal to or greater than 20 micrometers, having a p/n junction formed by any means, whether or not the cell has undergone other processing, including, but not limited to, cleaning, etching, coating, and/or addition of materials (including, but not limited to, metallization and conductor patterns) to collect and forward the electricity that is generated by the cell.
Merchandise under consideration may be described at the time of importation as parts for final finished products that are assembled after importation, including, but not limited to, modules, laminates, panels, building-integrated modules, building-integrated panels, or other finished goods kits. Such parts that otherwise meet the definition of merchandise under consideration are included in the scope of the investigations.
Excluded from the scope of the investigations are thin film photovoltaic products produced from amorphous silicon (a-Si), cadmium telluride (CdTe), or copper indium gallium selenide (CIGS). Also excluded from the scope of the investigations are crystalline silicon photovoltaic cells, not exceeding 10,000 mm 2 in surface area, that are permanently integrated into a consumer good whose function is other than power generation and that consumes the electricity generated by the integrated crystalline silicon photovoltaic cell. Where more than one cell is permanently integrated into a consumer good, the surface area for purposes of this exclusion shall be the total combined surface area of all cells that are integrated into the consumer good.
Additionally, excluded from the scope of the investigations are panels with surface area from 3,450 mm 2 to 33,782 mm 2 with one black wire and one red wire (each of type 22 AWG or 24 AWG not more than 206 mm in length when measured from panel extrusion), and not exceeding 2.9 volts, 1.1 amps, and 3.19 watts. For the purposes of this exclusion, no panel shall contain an internal battery or external computer peripheral ports.
Also excluded from the scope of the investigations are:
1. Off grid CSPV panels in rigid form with a glass cover, with the following characteristics: (A) a total power output of 100 watts or less per panel; (B) a maximum surface area of 8,000 cm 2 per panel; (C) do not include a built-in inverter; (D) must include a permanently connected wire that terminates in either an 8 mm male barrel connector, or a two-port rectangular connector with two pins in square housings of different colors; (E) must include visible parallel grid collector metallic wire lines every 1-4 millimeters across each solar cell; and (F) must be in individual retail packaging (for purposes of this provision, retail packaging typically includes graphics, the product name, its description and/or features, and foam for transport); and
2. Off grid CSPV panels without a glass cover, with the following characteristics: (A) a total power output of 100 watts or less per panel; (B) a maximum surface area of 8,000 cm 2 per panel; (C) do not include a built-in inverter; (D) must include visible parallel grid collector metallic wire lines every 1-4 millimeters across each solar cell; and (E) each panel is (1) permanently integrated into a consumer good; (2) encased in a laminated material without stitching, or (3) has all of the following characteristics: (i) the panel is encased in sewn fabric with visible stitching, (ii) includes a mesh zippered storage pocket, and (iii) includes a permanently attached wire that terminates in a female USB-A connector.
In addition, the following CSPV panels are excluded from the scope of the investigations: off-grid CSPV panels in rigid form with a glass cover, with each of the following physical characteristics, whether or not assembled into a fully completed off-grid hydropanel whose function is conversion of water vapor into liquid water: (A) a total power output of no more than 80 watts per panel; (B) a surface area of less than 5,000 square centimeters (cm 2 ) per panel; (C) do not include a built-in inverter; (D) do not have a frame around the edges of the panel; (E) include a clear glass back panel; and (F) must include a permanently connected wire that terminates in a twoport rectangular connector.
Additionally excluded from the scope of these investigations are off-grid small portable crystalline silicon photovoltaic panels, with or without a glass cover, with the following characteristics: (1) a total power output of 200 watts or less per panel; (2) a maximum surface area of 16,000 cm 2 per panel; (3) no built-in inverter; (4) an integrated handle or a handle attached to the package for ease of carry; (5) one or more integrated kickstands for easy installation or angle adjustment; and (6) a wire of not less than 3 meters either permanently connected or attached to the package that terminates in an 8 mm diameter male barrel connector.
Also excluded from the scope of these investigations are off-grid crystalline silicon photovoltaic panels in rigid form with a glass cover, with each of the following physical characteristics, whether or not assembled into a fully completed off-grid hydropanel whose function is conversion of water vapor into liquid water: (A) a total power output of no more than 180 watts per panel at 155 degrees Celsius; (B) a surface area of less than 16,000 square centimeters (cm 2 ) per panel; (C) include a keep-out area of approximately 1,200 cm 2 around the edges of the panel that does not contain solar cells; (D) do not include a built-in inverter; (E) do not have a frame around the edges of the panel; (F) include a clear glass back panel; (G) must include a permanently connected wire that terminates in a two-port rounded rectangular, sealed connector; (H) include a thermistor installed into the permanently connected wire before the twoport connector; and (I) include exposed positive and negative terminals at opposite ends of the panel, not enclosed in a junction box.
Further excluded from the scope of the investigations are:
1. Off grid rigid CSPV panels with a glass cover, with the following characteristics: (A) a total power output of 200 watts or less per panel, (B) a maximum surface area of 10,500 cm 2 per panel, (C) do not include a built-in inverter, (D) must include a permanently connected wire that terminates in waterproof connector with a cylindrical positive electrode and a rectangular negative electrode with the positive and negative electrodes having an interlocking structure, (E) must include visible parallel grid collector metallic wire lines every 1-4 millimeters across each solar cell, and (F) must be in individual retail packaging (for purposes of this provision, retail packaging typically includes graphics, the product name, its description and/or features); and
2. Off-grid small portable crystalline silicon photovoltaic panels, with or without a glass cover, with the following characteristics: (A) a total power output of 200 watts or less per panel, (B) a maximum surface area of 16,000 cm 2 per panel, (C) no built-in inverter, (D) an integrated handle or a handle attached to the package for ease of carry, (E) one or more integrated kickstands for easy installation or angle adjustment, and (F) a wire either permanently connected or attached to the package terminates in waterproof connector with a cylindrical positive electrode and a rectangular negative electrode with the positive and negative electrodes having an interlocking structure.
Also excluded from the scope of the investigations are:
[top] 1. Off grid rigid CSPV panels with a glass cover, with the following characteristics: (A) a total power output of 200 watts or less per panel, (B) a maximum surface area of 10,500 cm 2 per panel, (C) do not include a built-in inverter, (D) must include a permanently connected wire that terminates in waterproof connector with a cylindrical positive electrode and a rectangular negative electrode with the positive and negative electrodes having an interlocking structure, (E) must include visible parallel grid collector metallic wire lines every 1-4
2. Small off-grid panels with glass cover, with the following characteristics: (A) surface area from 3,450 mm 2 to 33,782 mm 2 , (B) with one black wire and one red wire (each of type 22AWG or 28 AWG not more than 350 mm in length when measured from panel extrusion), (C) not exceeding 10 volts, (D) not exceeding 1.1 amps, (E) not exceeding 6 watts, and (F) for the purposes of this exclusion, no panel shall contain an internal battery or external computer peripheral ports.
Additionally excluded from the scope of the investigations are:
1. Off grid rigid CSPV panels with a glass cover, with the following characteristics: (A) a total power output of 175 watts or less per panel, (B) a maximum surface area of 9,000 cm 2 per panel, (C) do not include a built-in inverter, (D) must include a permanently connected wire that terminates in waterproof connector with a cylindrical positive electrode and a rectangular negative electrode with the positive and negative electrodes having an interlocking structure; (E) must include visible parallel grid collector metallic wire lines every 1-4 millimeters across each solar cell, and (F) must be in individual retail packaging (for purposes of this provision, retail packaging typically includes graphics, the product name, its description and/or features); and
2. Off grid CSPV panels without a glass cover, with the following characteristics, (A) a total power output of 220 watts or less per panel, (B) a maximum surface area of 16,000 cm 2 per panel, (C) do not include a built-in inverter, (D) must include visible parallel grid collector metallic wire lines every 1-4 millimeters across each solar cell, and (E) each panel is encased in a laminated material without stitching.
Also excluded from the scope of these investigations are off-grid CSPV panels in rigid form, with or without a glass cover, permanently attached to an aluminum extrusion that is an integral component of an automation device that controls natural light, whether or not assembled into a fully completed automation device that controls natural light, with the following characteristics:
1. a total power output of 20 watts or less per panel;
2. a maximum surface area of 1,000 cm 2 per panel;
3. does not include a built-in inverter for powering third party devices.
Modules, laminates, and panels produced in a third-country from cells produced in a subject country are covered by the investigations; however, modules, laminates, and panels produced in a subject country from cells produced in a third-country are not covered by the investigations.
Also excluded from the scope of these investigations are all products covered by the scope of the antidumping and countervailing duty orders on Crystalline Silicon Photovoltaic Cells, Whether or Not Assembled into Modules, from the People's Republic of China: Amended Final Determination of Sales at Less Than Fair Value, and Antidumping Duty Order, 77 FR 73018 (December 7, 2012); and Crystalline Silicon Photovoltaic Cells, Whether or Not Assembled into Modules, from the People's Republic of China: Countervailing Duty Order, 77 FR 73017 (December 7, 2012).
Merchandise covered by the investigations is currently classified in the Harmonized Tariff System of the United States (HTSUS) under subheadings 8541.42.0010 and 8541.43.0010. Imports of the subject merchandise may enter under HTSUS subheadings 8501.71.0000, 8501.72.1000, 8501.72.2000, 8501.72.3000, 8501.72.9000, 8501.80.1000, 8501.80.2000, 8501.80.3000, 8501.80.9000, 8507.20.8010, 8507.20.8031, 8507.20.8041, 8507.20.8061, and 8507.20.8091. These HTSUS subheadings are provided for convenience and customs purposes; the written description of the scope of the investigations is dispositive.
Appendix II
List of Topics Discussed in the Preliminary Decision Memorandum
I. Summary
II. Background
III. Period of Investigation
IV. Application of Facts Available with Adverse Inferences
V. Adjustments To Cash Deposit Rates For Export Subsidies In The Companion Countervailing Duty Investigation
VI. Recommendation
[FR Doc. 2024-28402 Filed 12-3-24; 8:45 am]
BILLING CODE 3510-DS-P