89 FR 249 pgs. 106602-106603 - QPS Evaluation Services, Inc.: Grant of Expansion of Recognition
Type: NOTICEVolume: 89Number: 249Pages: 106602 - 106603
Pages: 106602, 106603Docket number: [Docket No. OSHA-2010-0046]
FR document: [FR Doc. 2024-31245 Filed 12-27-24; 8:45 am]
Agency: Labor Department
Sub Agency: Occupational Safety and Health Administration
Official PDF Version: PDF Version
[top]
DEPARTMENT OF LABOR
Occupational Safety and Health Administration
[Docket No. OSHA-2010-0046]
QPS Evaluation Services, Inc.: Grant of Expansion of Recognition
AGENCY:
Occupational Safety and Health Administration (OSHA), Labor.
ACTION:
Notice.
SUMMARY:
In this notice, OSHA announces the final decision to expand the scope of recognition for QPS Evaluation Services, Inc. as a Nationally Recognized Testing Laboratory (NRTL).
DATES:
The expansion of the scope of recognition becomes effective on December 30, 2024.
FOR FURTHER INFORMATION CONTACT:
Information regarding this notice is available from the following sources:
Press inquiries: Contact Mr. Frank Meilinger, Director, OSHA Office of Communications, U.S. Department of Labor; telephone (202) 693-1999 or email meilinger.francis2@dol.gov .
General and technical information: Contact Mr. Kevin Robinson, Director, Office of Technical Programs and Coordination Activities, Directorate of Technical Support and Emergency Management, Occupational Safety and Health Administration, U.S. Department of Labor; telephone (202) 693-1911 or email robinson.kevin@dol.gov .
SUPPLEMENTARY INFORMATION:
I. Notice of Final Decision
OSHA hereby gives notice of the expansion of the scope of recognition of QPS Evaluation Services, Inc. (QPS) as a NRTL. QPS's expansion covers the addition of five test standards to the NRTL scope of recognition.
[top] OSHA's recognition of a NRTL signifies that the organization meets the requirements specified in 29 CFR 1910.7. Recognition is an acknowledgment that the organization can perform independent safety testing and certification of the specific products covered within the scope of recognition. Each NRTL's scope of recognition includes: (1) the type of products the NRTL may test, with each type specified by the applicable test standard; and (2) the recognized site(s) that has/have the technical capability to perform the product-testing and product-certification activities for test standards within the NRTL's scope. Recognition is not a delegation or grant of government authority; however, recognition enables employers to use products approved by the NRTL to meet OSHA standards that require product testing and certification.
The agency processes applications by a NRTL for initial recognition and for an expansion or renewal of this recognition, following requirements in Appendix A to 29 CFR 1910.7. This appendix requires that the agency publish two notices in the Federal Register in processing an application. In the first notice, OSHA announces the application and provides a preliminary finding. In the second notice, the agency provides a final decision on the application. These notices set forth the NRTL's scope of recognition or modifications of that scope. OSHA maintains an informational web page for each NRTL, including QPS which details the NRTL's scope of recognition. These pages are available from the OSHA website at https://www.osha.gov/dts/otpca/nrtl/index.html .
QPS submitted an application to OSHA for expansion of the NRTL scope of recognition on February 13, 2024 (OSHA-2010-0046-0021), requesting the addition of five standards to the NRTL scope of recognition. OSHA staff performed a detailed analysis of the application packet and reviewed other pertinent information. OSHA did not perform an on-site review related to this application.
OSHA published the preliminary notice announcing QPS's expansion application in the Federal Register on November 7, 2024 (89 FR 88306). The agency requested comments by November 22, 2024, however no comments were received in response to this notice.
To obtain or review copies of all public documents pertaining to the QPS's application, go to https://www.regulations.gov or contact the Docket Office, Occupational Safety and Health Administration, U.S. Department of Labor. Docket No. OSHA-2010-0046 contains all materials in the record concerning QPS's recognition. Contact the OSHA Docket Office at (202) 693-2350 (TTY (877) 889-5627) for assistance in locating docket submissions.
II. Final Decision and Order
OSHA staff examined QPS's expansion application, its capability to meet the requirements of the test standards, and other pertinent information. Based on its review of this evidence, OSHA finds that QPS meets the requirements of 29 CFR 1910.7 for expansion of its recognition, subject to the limitations and conditions listed in this notice. OSHA, therefore, is proceeding with this final notice to grant QPS's application for an expansion of the scope of recognition. OSHA limits the expansion of QPS's recognition to testing and certification of products for demonstration of conformance to the test standards listed below in table 1.
| Test Standard | Test standard title |
|---|---|
| UL 22 | Amusement and Gaming Machines. |
| UL 751 | Vending Machines. |
| UL 1012 | Power Units Other Than Class 2. |
| UL 891 | Standard for Switchboards. |
| ASME A17.5? 1 | Elevator and Escalator Electrical Equipment. |
OSHA's recognition of any NRTL for a particular test standard is limited to equipment or materials for which OSHA standards require third-party testing and certification before using them in the workplace. Consequently, if a test standard also covers any products for which OSHA does not require such testing and certification, a NRTL's scope of recognition does not include these products.
Footnotes:
1 ?The preliminary notice announcing QPS's expansion application contained a typographical error. The designation of the Elevator and Escalator Electrical Equipment test standard was incorrectly listed as ASME 17.5. See 89 FR 88307. OSHA corrects this typographical error in this Notice.
The American National Standards Institute (ANSI) may approve the test standards listed above as American National Standards. However, for convenience, we may use the designation of the standards-developing organization for the standard as opposed to the ANSI designation. Under the NRTL Program's policy (see OSHA Instruction CPL 1-0.3, Appendix C, paragraph XIV), any NRTL recognized for a particular test standard may use either the proprietary version of the test standard or the ANSI version of that standard. Contact ANSI to determine whether a test standard is currently ANSI-approved.
A. Conditions
In addition to those conditions already required by 29 CFR 1910.7, QPS must abide by the following conditions of the recognition:
1. QPS must inform OSHA as soon as possible, in writing, of any change of ownership, facilities, or key personnel, and of any major change in its operations as a NRTL, and provide details of the change(s);
2. QPS must meet all the terms of its recognition and comply with all OSHA policies pertaining to this recognition; and
3. QPS must continue to meet the requirements for recognition, including all previously published conditions on QPS's scope of recognition, in all areas for which it has recognition.
Pursuant to the authority in 29 CFR 1910.7, OSHA hereby expands the scope of recognition of QPS as a NRTL, subject to the limitations and conditions specified above.
III. Authority and Signature
James S. Frederick, Deputy Assistant Secretary of Labor for Occupational Safety and Health, authorized the preparation of this notice. Accordingly, the agency is issuing this notice pursuant to 29 U.S.C. 657(g)(2), Secretary of Labor's Order No. 8-2020 (85 FR 58393, Sept. 18, 2020), and 29 CFR 1910.7.
Signed at Washington, DC, on December 19, 2024.
James S. Frederick,
Deputy Assistant Secretary of Labor for Occupational Safety and Health.
[FR Doc. 2024-31245 Filed 12-27-24; 8:45 am]
BILLING CODE 4510-26-P