89 FR 20 pgs. 5938-5939 - Intertek Testing Services NA, Inc.: Grant of Expansion of Recognition
Type: NOTICEVolume: 89Number: 20Pages: 5938 - 5939
Pages: 5938, 5939Docket number: [Docket No. OSHA–2007–0039]
FR document: [FR Doc. 2024–01774 Filed 1–29–24; 8:45 am]
Agency: Labor Department
Sub Agency: Occupational Safety and Health Administration
Official PDF Version: PDF Version
[top]
DEPARTMENT OF LABOR
Occupational Safety and Health Administration
[Docket No. OSHA-2007-0039]
Intertek Testing Services NA, Inc.: Grant of Expansion of Recognition
AGENCY:
Occupational Safety and Health Administration (OSHA), Labor.
ACTION:
Notice.
SUMMARY:
In this notice, OSHA announces the final decision to expand the scope of recognition for Intertek Testing Services NA, Inc., as a Nationally Recognized Testing Laboratory (NRTL).
DATES:
The expansion of the scope of recognition becomes effective on January 30, 2024.
FOR FURTHER INFORMATION CONTACT:
Information regarding this notice is available from the following sources:
Press inquiries: Contact Mr. Frank Meilinger, Director, OSHA Office of Communications, phone: (202) 693-1999 or email: meilinger.francis2@dol.gov.
General and technical information: Contact Mr. Kevin Robinson, Director, Office of Technical Programs and Coordination Activities, Directorate of Technical Support and Emergency Management, Occupational Safety and Health Administration, phone: (202) 693-1911 or email: robinson.kevin@dol.gov.
SUPPLEMENTARY INFORMATION:
I. Notice of Final Decision
OSHA hereby gives notice of the expansion of the scope of recognition of Intertek Testing Services NA, Inc. (ITSNA) as a NRTL. ITSNA's expansion covers the addition of one test standard to the NRTL scope of recognition.
OSHA recognition of a NRTL signifies that the organization meets the requirements specified in 29 CFR 1910.7. Recognition is an acknowledgment that the organization can perform independent safety testing and certification of the specific products covered within the scope of recognition. Each NRTL's scope of recognition includes (1) the type of products the NRTL may test, with each type specified by the applicable test standard; and (2) the recognized site(s) that has/have the technical capability to perform the product-testing and product-certification activities for test standards within the NRTL's scope. Recognition is not a delegation or grant of government authority; however, recognition enables employers to use products approved by the NRTL to meet OSHA standards that require product testing and certification.
The agency processes an application by a NRTL for initial recognition and for an expansion or renewal of this recognition, following requirements in Appendix A, 29 CFR 1910.7. This appendix requires that the agency publish two notices in the Federal Register in processing an application. In the first notice, OSHA announces the application and provides the preliminary finding. In the second notice, the agency provides the final decision on the application. These notices set forth the NRTL's scope of recognition or modifications of that scope. OSHA maintains an informational web page for each NRTL, including ITSNA, which details the NRTL's scope of recognition. These pages are available from the OSHA website at http://www.osha.gov/dts/otpca/nrtl/index.html.
ITSNA submitted an application dated April 5, 2023 (OSHA-2007-0039-0051), requesting the addition of one test standard to the NRTL scope of recognition. OSHA staff performed a detailed analysis of the application packet and reviewed other pertinent information. OSHA did not perform any on-site reviews in relation to this application.
OSHA published the preliminary notice announcing ITSNA's expansion application in the Federal Register on December 18, 2023 (88 FR 87460). The agency requested comments by January 2, 2024, but it received no comments in response to this notice. OSHA is now proceeding with this final grant of expansion of ITSNA's NRTL recognition.
To obtain or review copies of all public documents pertaining to the ITSNA applications, go to https://www.regulations.gov or contact the Docket Office, Occupational Safety and Health Administration, U.S. Department of Labor. Docket No. OSHA-2007-0039 contains all materials in the record concerning ITSNA's recognition. All submissions, including copyrighted material, are available for inspection through the OSHA Docket Office. Contact the OSHA Docket Office at (202) 693-2350 for assistance in locating docket submissions.
II. Final Decision and Order
[top] OSHA staff examined ITSNA's expansion application, its capability to meet the requirements of the test standard, and other pertinent information. Based on its review of this evidence, OSHA finds that ITSNA meets the requirements of 29 CFR 1910.7 for expansion of its recognition, subject to the limitations and conditions listed in this notice. OSHA, therefore, is proceeding with this final notice to grant ITSNA's expanded scope of recognition. OSHA limits the expansion of ITSNA's recognition to testing and certification of products for demonstration of conformance to the test standard listed below in table 1.
| Test standard | Test standard title |
|---|---|
| UL 2225 | Cables and Cable-Fittings for Use in Hazardous (Classified) Locations. |
OSHA's recognition of any NRTL for a particular test standard is limited to equipment or materials for which OSHA standards require third-party testing and certification before using them in the workplace. Consequently, if a test standard also covers any products for which OSHA does not require such testing and certification, a NRTL's scope of recognition does not include these products.
The American National Standards Institute (ANSI) may approve the test standards listed above as American National Standards. However, for convenience, we may use the designation of the standards-developing organization for the standard as opposed to the ANSI designation. Under the NRTL Program's policy (see OSHA Instruction CPL 01-00-004, chapter 2, section VIII), any NRTL recognized for a particular test standard may use either the proprietary version of the test standard or the ANSI version of that standard. Contact ANSI to determine whether a test standard is currently ANSI-approved.
A. Conditions
Recognition is contingent on continued compliance with 29 CFR 1910.7, including, but not limited to, abiding by the following conditions of the recognition:
1. ITSNA must inform OSHA as soon as possible, in writing, of any change of ownership, facilities, or key personnel, and of any major change in its operations as a NRTL, and provide details of the change(s);
2. ITSNA must meet all the terms of its recognition and comply with all OSHA policies pertaining to this recognition; and
3. ITSNA must continue to meet the requirements for recognition, including all previously published conditions on ITSNA's scope of recognition, in all areas for which it has recognition.
Pursuant to the authority in 29 CFR 1910.7, OSHA hereby expands the scope of recognition of ITSNA as a NRTL, subject to the limitations and conditions specified above.
III. Authority and Signature
James S. Frederick, Deputy Assistant Secretary of Labor for Occupational Safety and Health, authorized the preparation of this notice. Accordingly, the agency is issuing this notice pursuant to 29 U.S.C. 657(g)(2), Secretary of Labor's Order No. 8-2020 (85 FR 58393, Sept. 18, 2020), and 29 CFR 1910.7.
Signed at Washington, DC, on January 24, 2024.
James S. Frederick,
Deputy Assistant Secretary of Labor for Occupational Safety and Health.
[FR Doc. 2024-01774 Filed 1-29-24; 8:45 am]
BILLING CODE 4510-26-P