87 FR 182 pgs. 57722-57723 - UL LLC: Grant of Expansion of Recognition
Type: NOTICEVolume: 87Number: 182Pages: 57722 - 57723
Pages: 57722, 57723Docket number: [Docket No. OSHA-2009-0025]
FR document: [FR Doc. 2022-20397 Filed 9-20-22; 8:45 am]
Agency: Labor Department
Sub Agency: Occupational Safety and Health Administration
Official PDF Version: PDF Version
[top]
DEPARTMENT OF LABOR
Occupational Safety and Health Administration
[Docket No. OSHA-2009-0025]
UL LLC: Grant of Expansion of Recognition
AGENCY:
Occupational Safety and Health Administration (OSHA), Labor.
ACTION:
Notice.
SUMMARY:
In this notice, OSHA announces the final decision to expand the scope of recognition for UL LLC as a Nationally Recognized Testing Laboratory (NRTL).
DATES:
The expansion of the scope of recognition becomes effective on September 21, 2022.
FOR FURTHER INFORMATION CONTACT:
Information regarding this notice is available from the following sources:
Press inquiries: Contact Mr. Frank Meilinger, Director, OSHA Office of Communications, U.S. Department of Labor, telephone: (202) 693-1999; email: meilinger.francis2@dol.gov.
[top] General and technical information: Contact Mr. Kevin Robinson, Director, Office of Technical Programs and
SUPPLEMENTARY INFORMATION:
I. Notice of Final Decision
OSHA hereby gives notice of the expansion of the scope of recognition of UL LLC (UL) as a NRTL. UL's expansion covers the addition of two test standards to the NRTL scope of recognition.
OSHA recognition of a NRTL signifies that the organization meets the requirements specified in 29 CFR 1910.7. Recognition is an acknowledgment that the organization can perform independent safety testing and certification of the specific products covered within the scope of recognition and is not a delegation or grant of government authority. As a result of recognition, employers may use products properly approved by the NRTL to meet OSHA standards that require testing and certification of the products.
The agency processes applications by a NRTL for initial recognition and for an expansion or renewal of this recognition, following requirements in appendix A to 29 CFR 1910.7. This appendix requires that the agency publish two notices in the Federal Register in processing an application. In the first notice, OSHA announces the application and provides a preliminary finding. In the second notice, the agency provides the final decision on the application. These notices set forth the NRTL's scope of recognition or modifications of that scope. OSHA maintains an informational web page for each NRTL, including UL, which details the NRTL's scope of recognition. These pages are available from the OSHA website at http://www.osha.gov/dts/otpca/nrtl/index.html.
UL submitted an application, dated December 24, 2021, to expand their recognition as a NRTL to include thirty-eight additional test standards (OSHA-2009-0025-0043). This application was amended to separate two standards from the original request (OSHA-2009-0025-0044). The remaining thirty-six standards will be addressed in a separate Federal Register notice in the future. This expansion covers the addition of two standards to UL's NRTL scope of recognition. OSHA staff performed a detailed analysis of the application packet and reviewed other pertinent information. OSHA did not perform any on-site reviews in relation to this application.
OSHA published the preliminary notice announcing UL's expansion application in the Federal Register on August 19, 2022 (87 FR 51152). The agency requested comments by September 6, 2022, but it received no comments in response to this notice. OSHA is now proceeding with this final notice to grant this expansion of UL's scope of recognition.
To obtain or review copies of all public documents pertaining to UL's application, go to http://www.regulations.gov or contact the Docket Office, Occupational Safety and Health Administration, U.S. Department of Labor. Docket No. OSHA-2009-0025 contains all materials in the record concerning UL's recognition. Please note: Due to the COVID-19 pandemic, the Docket Office is closed to the public at this time but can be contacted at (202) 693-2350 (TTY ((877) 889-5627).
II. Final Decision and Order
OSHA staff examined UL's expansion application, its capability to meet the requirements of the test standards, and other pertinent information. Based on its review of this evidence, OSHA finds that UL meets the requirements of 29 CFR 1910.7 for expansion of its recognition, subject to the limitations and conditions listed in this notice. OSHA, therefore, is proceeding with this final notice to grant UL's scope of recognition. OSHA limits the expansion of UL's recognition to testing and certification of products for demonstration of conformance to the test standards listed below in table 1.
| Test standard | Test standard title |
|---|---|
| UL 2272 | Standard for Electrical Systems and Personal E-Mobility Devices. |
| UL 2849 | Standard for Electrical Systems for eBikes |
OSHA's recognition of any NRTL for a particular test standard is limited to equipment or materials for which OSHA standards require third-party testing and certification before using them in the workplace. Consequently, if a test standard also covers any products for which OSHA does not require such testing and certification, a NRTL's scope of recognition does not include these products.
The American National Standards Institute (ANSI) may approve the test standards listed above as American National Standards. However, for convenience, we may use the designation of the standards-developing organization for the standards as opposed to the ANSI designation. Under the NRTL Program's policy (see OSHA Instruction CPL 01-00-004, chapter 2, section VIII), only standards determined to be appropriate test standards may be approved for NRTL recognition. Any NRTL recognized for a particular test standard may use either the proprietary version of the test standard or the ANSI version of that standard. Contact ANSI to determine whether a test standard is currently ANSI-approved.
A. Conditions
In addition to those conditions already required by 29 CFR 1910.7, UL must abide by the following conditions of the recognition:
1. UL must inform OSHA as soon as possible, in writing, of any change of ownership, facilities, or key personnel, and of any major change in its operations as a NRTL, and provide details of the change(s);
2. UL must meet all the terms of its recognition and comply with all OSHA policies pertaining to this recognition; and
3. UL must continue to meet the requirements for recognition, including all previously published conditions on UL's scope of recognition, in all areas for which it has recognition.
Pursuant to the authority in 29 CFR 1910.7, OSHA hereby expands the scope of recognition of UL, subject to the limitations and conditions specified above.
III. Authority and Signature
James S. Frederick, Deputy Assistant Secretary of Labor for Occupational Safety and Health, 200 Constitution Avenue NW, Washington, DC 20210, authorized the preparation of this notice. Accordingly, the agency is issuing this notice pursuant to 29 U.S.C. 657(g)(2), Secretary of Labor's Order No. 8-2020 (85 FR 58393, September 18, 2020) and 29 CFR 1910.7.
Signed at Washington, DC, on September 14, 2022.
James S. Frederick,
Deputy Assistant Secretary of Labor for Occupational Safety and Health.
[FR Doc. 2022-20397 Filed 9-20-22; 8:45 am]
BILLING CODE 4510-26-P