87 FR 160 pgs. 51156-51157 - Intertek Testing Services NA, Inc.: Grant of Expansion of Recognition
Type: NOTICEVolume: 87Number: 160Pages: 51156 - 51157
Pages: 51156, 51157Docket number: [Docket No. OSHA-2007-0039]
FR document: [FR Doc. 2022-17883 Filed 8-18-22; 8:45 am]
Agency: Labor Department
Sub Agency: Occupational Safety and Health Administration
Official PDF Version: PDF Version
[top]
DEPARTMENT OF LABOR
Occupational Safety and Health Administration
[Docket No. OSHA-2007-0039]
Intertek Testing Services NA, Inc.: Grant of Expansion of Recognition
AGENCY:
Occupational Safety and Health Administration (OSHA), Labor.
ACTION:
Notice.
SUMMARY:
In this notice, OSHA announces the final decision to expand the scope of recognition for Intertek Testing Services NA, Inc., as a Nationally Recognized Testing Laboratory (NRTL).
DATES:
The expansion of the scope of recognition becomes effective on August 19, 2022.
FOR FURTHER INFORMATION CONTACT:
Information regarding this notice is available from the following sources:
Press inquiries: Contact Mr. Frank Meilinger, Director, OSHA Office of Communications, U.S. Department of Labor; telephone (202) 693-1999 or email meilinger.francis2@dol.gov.
General and technical information: Contact Mr. Kevin Robinson, Director, Office of Technical Programs and Coordination Activities, Directorate of Technical Support and Emergency Management, Occupational Safety and Health Administration, U.S. Department of Labor; telephone (202) 693-2110 or email robinson.kevin@dol.gov.
SUPPLEMENTARY INFORMATION:
I. Notice of Final Decision
OSHA hereby gives notice of the expansion of the scope of recognition of Intertek Testing Services NA, Inc. (ITSNA) as a NRTL. ITSNA's expansion covers the addition of one test standard to the NRTL scope of recognition.
OSHA recognition of a NRTL signifies that the organization meets the requirements specified in 29 CFR 1910.7. Recognition is an acknowledgment that the organization can perform independent safety testing and certification of the specific products covered within the scope of recognition. Each NRTL's scope of recognition includes (1) the type of products the NRTL may test, with each type specified by the applicable test standard; and (2) the recognized site(s) that has/have the technical capability to perform the product-testing and product-certification activities for test standards within the NRTL's scope. Recognition is not a delegation or grant of government authority; however, recognition enables employers to use products approved by the NRTL to meet OSHA standards that require product testing and certification.
[top] The agency processes an application by a NRTL for initial recognition and for an expansion or renewal of this
ITSNA submitted an application dated November 23, 2021, (OSHA-2007-0039-0035), to expand their recognition to include one additional test standard. The standard requested in the expansion application and addressed here is a replacement standard for ISA 12.12.01, which is currently included in ITSNA's NRTL Scope of Recognition. OSHA staff performed detailed analysis of the application packets and reviewed other pertinent information. OSHA did not perform any on-site reviews in relation to this application.
OSHA published the preliminary notice announcing ITSNA's expansion application in the Federal Register on June 17, 2022 (87 FR 36539). The agency requested comments by July 5, 2022, but it received no comments in response to this notice. OSHA is now proceeding with this final grant of expansion of ITSNA's NRTL recognition.
To obtain or review copies of all public documents pertaining to ITSNA's expansion application, go to http://www.regulations.gov or contact the Docket Office, Occupational Safety and Health Administration, U.S. Department of Labor. Docket No. OSHA-2007-0039 contains all materials in the record concerning ITSNA's recognition. Please note: Due to the COVID-19 pandemic, the Docket Office is closed to the public at this time but can be contacted at (202) 693-2350.
II. Final Decision and Order
OSHA staff examined ITSNA's expansion application, its capability to meet the requirements of the test standards, and other pertinent information. Based on its review of this evidence, OSHA finds that ITSNA meets the requirements of 29 CFR 1910.7 for expansion of its recognition, subject to the limitations and conditions listed in this notice. OSHA, therefore, is proceeding with this final notice to grant ITSNA's expanded scope of recognition. OSHA limits the expansion of ITSNA's recognition to testing and certification of products for demonstration of conformance to the test standard listed below in Table 1.
| Test standard | Test standard title |
|---|---|
| UL 121201 | Nonincendive Electrical Equipment for Use in Class I and Class II, Division 2 and Class III, Divisions 1 and 2 Hazardous (Classified) Locations. |
OSHA's recognition of any NRTL for a particular test standard is limited to equipment or materials for which OSHA standards require third-party testing and certification before using them in the workplace. Consequently, if a test standard also covers any products for which OSHA does not require such testing and certification, a NRTL's scope of recognition does not include these products.
A. Conditions
Recognition is contingent on continued compliance with 29 CFR 1910.7, including, but not limited to, abiding by the following conditions of the recognition:
1. ITSNA must inform OSHA as soon as possible, in writing, of any change of ownership, facilities, or key personnel, and of any major change in its operations as a NRTL, and provide details of the change(s);
2. ITSNA must meet all the terms of its recognition and comply with all OSHA policies pertaining to this recognition; and
3. ITSNA must continue to meet the requirements for recognition, including all previously published conditions on ITSNA's scope of recognition, in all areas for which it has recognition.
Pursuant to the authority in 29 CFR 1910.7, OSHA hereby expands the scope of recognition of ITSNA as a NRTL, subject to the limitations and conditions specified above.
III. Authority and Signature
James S. Frederick, Deputy Assistant Secretary of Labor for Occupational Safety and Health, 200 Constitution Avenue NW, Washington, DC 20210, authorized the preparation of this notice. Accordingly, the agency is issuing this notice pursuant to Section 29 U.S.C. 657(g)(2), Secretary of Labor's Order No. 8-2020 (85 FR 58393; Sept. 18, 2020), and 29 CFR 1910.7.
Signed at Washington, DC, on August 5, 2022.
James S. Frederick,
Deputy Assistant Secretary of Labor for Occupational Safety and Health.
[FR Doc. 2022-17883 Filed 8-18-22; 8:45 am]
BILLING CODE 4510-26-P