87 FR 135 pgs. 42318-42320 - Airworthiness Directives; Airbus SAS Airplanes
Type: RULEVolume: 87Number: 135Pages: 42318 - 42320
Pages: 42318, 42319, 42320Docket number: [Docket No. FAA-2022-0505; Project Identifier MCAI-2021-01289-T; Amendment 39-22111; AD 2022-14-06]
FR document: [FR Doc. 2022-15136 Filed 7-14-22; 8:45 am]
Agency: Transportation Department
Sub Agency: Federal Aviation Administration
Official PDF Version: PDF Version
[top]
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. FAA-2022-0505; Project Identifier MCAI-2021-01289-T; Amendment 39-22111; AD 2022-14-06]
RIN 2120-AA64
Airworthiness Directives; Airbus SAS Airplanes
AGENCY:
Federal Aviation Administration (FAA), DOT.
ACTION:
Final rule.
SUMMARY:
The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A300 B4-600, B4-600R, and F4-600R series airplanes, and Model A300 C4-605R Variant F airplanes (collectively called Model A300-600 series airplanes). This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
DATES:
This AD is effective August 19, 2022.
The Director of the Federal Register approved the incorporation by reference of a certain publication listed in this AD as of August 19, 2022.
ADDRESSES:
For material incorporated by reference (IBR) in this AD, contact EASA, Konrad-Adenauer-Ufer 3, 50668 Cologne, Germany; telephone +49 221 8999 000; email ADs@easa.europa.eu; internet www.easa.europa.eu. You may find this IBR material on the EASA website at https://ad.easa.europa.eu. You may view this material at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206-231-3195. It is also available in the AD docket at https://www.regulations.gov by searching for and locating Docket No. FAA-2022-0505.
Examining the AD Docket
You may examine the AD docket at https://www.regulations.gov by searching for and locating Docket No. FAA-2022-0505; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this final rule, the mandatory continuing airworthiness information (MCAI), any comments received, and other information. The address for Docket Operations is U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590.
FOR FURTHER INFORMATION CONTACT:
Dan Rodina, Aerospace Engineer, Large Aircraft Section, FAA, International Validation Branch, 2200 South 216th St., Des Moines, WA 98198; phone: 206-231-3225; email: dan.rodina@faa.gov.
SUPPLEMENTARY INFORMATION:
Background
EASA, which is the Technical Agent for the Member States of the European Union, has issued EASA AD 2021-0258, dated November 17, 2021 (EASA AD 2021-0258) (also referred to as the MCAI), to correct an unsafe condition for all Airbus SAS Model A300-600 series airplanes.
The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to all Airbus SAS Model A300 B4-600, B4-600R, and F4-600R series airplanes, and Model A300 C4-605R Variant F airplanes (collectively called Model A300-600 series airplanes). The NPRM published in the Federal Register on May 6, 2022 (87 FR 27029). The NPRM was prompted by a determination that new or more restrictive airworthiness limitations are necessary. The NPRM proposed to require revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations, as specified in EASA AD 2021-0258.
The FAA is issuing this AD to prevent reduced structural integrity of the airplane. See the MCAI for additional background information.
EASA previously issued EASA AD 2019-0090, dated April 26, 2019 (EASA AD 2019-0090), requiring the actions described in the Airbus A300-600 Airworthiness Limitations Section (ALS), Part 2, "Damage Tolerant Airworthiness Limitation Items (DT-ALI)," Revision 03, dated December 14, 2018, which also includes the limit of validity (LOV) for the Model A300-600 airplanes. EASA AD 2019-0090 corresponds to FAA AD 2019-21-01, Amendment 39-19767 (84 FR 56935, October 24, 2019) (AD 2019-21-01). Since that EASA AD was issued, Airbus published the Variation, as defined in EASA AD 2021-0258, which reduces the LOV for Model A300-600 airplanes, reflecting the engineering data that supports the structural maintenance program and that corresponds to the period of time during which it is demonstrated that Widespread Fatigue Damage will not occur. EASA AD 2021-0258 does not supersede EASA AD 2019-0090, but does specify that it invalidates the LOV as specified in the Airbus A300-600 ALS, Part 2. Therefore, this AD would replace the LOVs specified in Airbus A300-600 Airworthiness Limitations Section (ALS), Part 2, "Damage Tolerant Airworthiness Limitation Items (DT-ALI)," Revision 03, dated December 14, 2018, as required by FAA AD 2019-21-01.
For the reason described above, this AD requires compliance with the reduced LOV as specified in the variation.
Discussion of Final Airworthiness Directive
Comments
The FAA received comments from the Air Line Pilots Association, International (ALPA) and FedEx who supported the NPRM without change.
Conclusion
[top] The FAA reviewed the relevant data, considered the comments received, and determined that air safety requires adopting this AD as proposed. Except for minor editorial changes, this AD is adopted as proposed in the NPRM. None of the changes will increase the
Related Service Information Under 1 CFR Part 51
EASA AD 2021-0258 describes new or more restrictive airworthiness limitations for airplane LOVs. This material is reasonably available because the interested parties have access to it through their normal course of business or by the means identified in the ADDRESSES section.
Costs of Compliance
The FAA estimates that this AD affects 110 airplanes of U.S. registry. The FAA estimates the following costs to comply with this AD:
The FAA has determined that revising the existing maintenance or inspection program takes an average of 90 work-hours per operator, although the agency recognizes that this number may vary from operator to operator. Since operators incorporate maintenance or inspection program changes for their affected fleet(s), the FAA has determined that a per-operator estimate is more accurate than a per-airplane estimate. Therefore, the agency estimates the average total cost per operator to be $7,650 (90 work-hours × $85 per work-hour).
Authority for This Rulemaking
Title 49 of the United States Code specifies the FAA's authority to issue rules on aviation safety. Subtitle I, section 106, describes the authority of the FAA Administrator. Subtitle VII: Aviation Programs, describes in more detail the scope of the Agency's authority.
The FAA is issuing this rulemaking under the authority described in Subtitle VII, Part A, Subpart III, Section 44701: General requirements. Under that section, Congress charges the FAA with promoting safe flight of civil aircraft in air commerce by prescribing regulations for practices, methods, and procedures the Administrator finds necessary for safety in air commerce. This regulation is within the scope of that authority because it addresses an unsafe condition that is likely to exist or develop on products identified in this rulemaking action.
Regulatory Findings
This AD will not have federalism implications under Executive Order 13132. This AD will not have a substantial direct effect on the States, on the relationship between the national government and the States, or on the distribution of power and responsibilities among the various levels of government.
For the reasons discussed above, I certify that this AD:
(1) Is not a "significant regulatory action" under Executive Order 12866,
(2) Will not affect intrastate aviation in Alaska, and
(3) Will not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act.
List of Subjects in 14 CFR Part 39
Air transportation, Aircraft, Aviation safety, Incorporation by reference, Safety.
The Amendment
Accordingly, under the authority delegated to me by the Administrator, the FAA amends 14 CFR part 39 as follows:
PART 39-AIRWORTHINESS DIRECTIVES
1. The authority citation for part 39 continues to read as follows:
Authority:
49 U.S.C. 106(g), 40113, 44701.
§?39.13 [Amended]
2. The FAA amends §?39.13 by adding the following new airworthiness directive:
2022-14-06 Airbus SAS: Amendment 39-22111; Docket No. FAA-2022-0505; Project Identifier MCAI-2021-01289-T.
(a) Effective Date
This airworthiness directive (AD) is effective August 19, 2022.
(b) Affected ADs
This AD affects AD 2019-21-01, Amendment 39-19767 (84 FR 56935, October 24, 2019) (AD 2019-21-01).
(c) Applicability
This AD applies to all Airbus SAS Model A300 B4-601, B4-603, B4-620, B4-622 B4-605R, B4-622R, C4-605R Variant F, F4-605R, and F4-622R airplanes, certificated in any category.
(d) Subject
Air Transport Association (ATA) of America Code 05, Time Limits/Maintenance Checks.
(e) Unsafe Condition
This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. The FAA is issuing this AD to prevent reduced structural integrity of the airplane.
(f) Compliance
Comply with this AD within the compliance times specified, unless already done.
(g) Requirements
Except as specified in paragraph (h) of this AD: Comply with all required actions and compliance times specified in, and in accordance with, European Union Aviation Safety Agency (EASA) AD 2021-0258, dated November 17, 2021 (EASA AD 2021-0258).
(h) Exceptions to EASA AD 2021-0258
(1) Where EASA AD 2021-0258 refers to its effective date, this AD requires using the effective date of this AD.
(2) Where paragraph (1) of EASA AD 2021-0258 specifies "This AD invalidates the LOV [limit of validity] as specified in Airbus A300-600 ALS Part 2 Revision 03 [EASA AD 2019-0090]," this AD replaces the LOVs specified in paragraph 3.1 of Airbus A300-600 Airworthiness Limitations Section (ALS), Part 2, "Damage Tolerant Airworthiness Limitation Items (DT-ALI)," Revision 03, dated December 14, 2018, as required by FAA AD 2019-21-01.
(3) Paragraph (2) of EASA AD 2021-0258 specifies revising "the approved AMP" within 12 months after its effective date, but this AD requires revising the existing maintenance or inspection program, as applicable, within 90 days after the effective date of this AD.
(4) The "Remarks" section of EASA AD 2021-0258 does not apply to this AD.
(i) Provisions for Alternative Actions and Intervals
After the existing maintenance or inspection program has been revised as required by paragraph (g) of this AD, no alternative actions ( e.g., inspections) or intervals are allowed unless they are approved as specified in the provisions of the "Ref. Publications" section of EASA AD 2021-0258.
(j) Additional AD Provisions
The following provisions also apply to this AD:
(1) Alternative Methods of Compliance (AMOCs): The Manager, Large Aircraft Section, International Validation Branch, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, send your request to your principal inspector or responsible Flight Standards Office, as appropriate. If sending information directly to the Large Aircraft Section, International Validation Branch, send it to the attention of the person identified in paragraph (k) of this AD. Information may be emailed to: 9-AVS-AIR-730-AMOC@faa.gov. Before using any approved AMOC, notify your appropriate principal inspector, or lacking a principal inspector, the manager of the local flight standards district office/certificate holding district office.
[top] (2) Contacting the Manufacturer: For any requirement in this AD to obtain instructions from a manufacturer, the instructions must be accomplished using a method approved by the Manager, Large Aircraft Section, International Validation Branch, FAA; or EASA; or Airbus SAS's EASA Design Organization Approval (DOA). If approved by the DOA, the approval must include the DOA-authorized signature.
(k) Related Information
For more information about this AD, contact Dan Rodina, Aerospace Engineer, Large Aircraft Section, FAA, International Validation Branch, 2200 South 216th St., Des Moines, WA 98198; phone: 206-231-3225; email: dan.rodina@faa.gov.
(l) Material Incorporated by Reference
(1) The Director of the Federal Register approved the incorporation by reference of the service information listed in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.
(2) You must use this service information as applicable to do the actions required by this AD, unless this AD specifies otherwise.
(i) European Union Aviation Safety Agency (EASA) AD 2021-0258, dated November 17, 2021.
(ii) [Reserved]
(3) For EASA AD 2021-0258, contact EASA, Konrad-Adenauer-Ufer 3, 50668 Cologne, Germany; telephone +49 221 8999 000; email ADs@easa.europa.eu; internet www.easa.europa.eu. You may find this EASA AD on the EASA website at https://ad.easa.europa.eu.
(4) You may view this material at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206-231-3195.
(5) You may view this material that is incorporated by reference at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, email fr.inspection@nara.gov, or go to: https://www.archives.gov/federal-register/cfr/ibr-locations.html.
Issued on June 27, 2022.
Gaetano A. Sciortino,
Deputy Director for Strategic Initiatives, Compliance & Airworthiness Division, Aircraft Certification Service.
[FR Doc. 2022-15136 Filed 7-14-22; 8:45 am]
BILLING CODE 4910-13-P