Previous Article 87 FR 205 pg. 64384 - Pipeline Safety: Safety of Gas Transmission Pipelines: Repair Criteria, Integrity Management Improvements, Cathodic Protection, Management of Change, and Other Related Amendments
Type: RULEVolume: 87Number: 205Page: 64384
Page: 64384Docket number: [Docket No. PHMSA-2011-0023; Amdt. No. 192-132]
FR document: [FR Doc. C1-2022-17031 Filed 10-24-22; 8:45 am]
Agency: Transportation Department
Sub Agency: Pipeline and Hazardous Materials Safety Administration
Official PDF Version: PDF Version
[top]
DEPARTMENT OF TRANSPORTATION
Pipeline and Hazardous Materials Safety Administration
49 CFR Part 192
[Docket No. PHMSA-2011-0023; Amdt. No. 192-132]
RIN 2137-AF39
Pipeline Safety: Safety of Gas Transmission Pipelines: Repair Criteria, Integrity Management Improvements, Cathodic Protection, Management of Change, and Other Related Amendments
Correction
In Rule Document 2022-17031, appearing on pages 52224-52279, in the issue of Wednesday, August 24, 2022, make the following correction:
On page 52267, in the third column, paragraph "(2)(i)" is corrected to read as set forth below.
§?192.3 Definitions. [Corrected]
(2)(i) If the length of the wrinkle bend cannot be reliably determined, then w rinkle bend means a bend in the pipe where (h/D)*100 exceeds 2 when S is less than 37,000 psi (255 MPa), where (h/D)*100 exceeds (47000- S )/10,000 +1 for psi [324- S )/69 +1 for MPa] when S is greater than 37,000 psi (255 MPa) but less than 47,000 psi (324 MPa), and where (h/D)*100 exceeds 1 when S is 47,000 psi (324 MPa) or more.
[FR Doc. C1-2022-17031 Filed 10-24-22; 8:45 am]
BILLING CODE 0099-10-P