87 FR 7 pgs. 1352-1354 - Airworthiness Directives; Bombardier, Inc., Airplanes
Type: RULEVolume: 87Number: 7Pages: 1352 - 1354
Pages: 1352, 1353, 1354Docket number: [Docket No. FAA-2021-0658; Project Identifier MCAI-2020-01582-T; Amendment 39-21850; AD 2021-25-07]
FR document: [FR Doc. 2021-28597 Filed 1-10-22; 8:45 am]
Agency: Transportation Department
Sub Agency: Federal Aviation Administration
Official PDF Version: PDF Version
[top]
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. FAA-2021-0658; Project Identifier MCAI-2020-01582-T; Amendment 39-21850; AD 2021-25-07]
RIN 2120-AA64
Airworthiness Directives; Bombardier, Inc., Airplanes
AGENCY:
Federal Aviation Administration (FAA), Department of Transportation (DOT).
ACTION:
Final rule.
SUMMARY:
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-100-1A10 airplanes. This AD was prompted by a discovery that a lockwire may not have been installed on the side stay actuator pin nut of the main landing gear (MLG). This AD requires inspecting the left-hand and right-hand MLG side stay actuator assembly pin nut for the presence of a lockwire, and installing a lockwire if necessary. The FAA is issuing this AD to address the unsafe condition on these products.
DATES:
This AD is effective February 15, 2022.
The Director of the Federal Register approved the incorporation by reference of certain publications listed in this AD as of February 15, 2022.
ADDRESSES:
For service information identified in this final rule, contact Bombardier, Inc., 200 Côte-Vertu Road West, Dorval, Québec H4S 2A3, Canada; North America toll-free telephone 1-866-538-1247 or direct-dial telephone 1-514-855-2999; email ac.yul@aero.bombardier.com; internet https://www.bombardier.com. You may view this service information at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206-231-3195. It is also available on the internet at https://www.regulations.gov by searching for and locating Docket No. FAA-2021-0658.
Examining the AD Docket
You may examine the AD docket on the internet at https://www.regulations.gov by searching for and locating Docket No. FAA-2021-0658; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this final rule, any comments received, and other information. The address for Docket Operations is U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590.
FOR FURTHER INFORMATION CONTACT:
Elizabeth Dowling, Aerospace Engineer, Mechanical Systems and Administrative Services Section, FAA, New York ACO Branch, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590; telephone 516-228-7300; fax 516-794-5531; email 9-avs-nyaco-cos@faa.gov.
SUPPLEMENTARY INFORMATION:
Background
Transport Canada Civil Aviation (TCCA), which is the aviation authority for Canada, has issued TCCA AD CF-2020-52, dated November 30, 2020 (also referred to after this as the Mandatory Continuing Airworthiness Information, or the MCAI), to correct an unsafe condition for certain Bombardier, Inc., Model BD-100-1A10 airplanes. You may examine the MCAI in the AD docket on the internet at https://www.regulations.gov by searching for and locating Docket No. FAA-2021-0658.
The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to certain Bombardier, Inc., Model BD-100-1A10 airplanes. The NPRM published in the Federal Register on August 12, 2021 (86 FR 44314). The NPRM was prompted by a discovery that a lockwire may not have been installed on the side stay actuator pin nut of the MLG. The NPRM proposed to require inspecting the left-hand and right-hand MLG side stay actuator assembly pin nut for the presence of a lockwire, and installing a lockwire if necessary. The FAA is issuing this AD to address a possible missing lockwire, which could result in loss of the nut, and if undetected, lead to the collapse of the affected MLG. See the MCAI for additional background information.
Comments
The FAA gave the public the opportunity to participate in developing this final rule. The FAA received no comments on the NPRM or on the determination of the cost to the public.
Conclusion
The FAA reviewed the relevant data and determined that air safety and the public interest require adopting this final rule as proposed, except for minor editorial changes. The FAA has determined that these minor changes:
• Are consistent with the intent that was proposed in the NPRM for addressing the unsafe condition; and
• Do not add any additional burden upon the public than was already proposed in the NPRM.
Related Service Information Under 1 CFR Part 51
[top] Bombardier has issued Service Bulletin 100-32-36, dated June 25, 2020; and Service Bulletin 350-32-012, dated June 25, 2020. This service information describes procedures for inspecting the left-hand and right-hand MLG side stay actuator assembly pin nut for presence of a lockwire and installing a lockwire. These documents
This service information is reasonably available because the interested parties have access to it through their normal course of business or by the means identified in the ADDRESSES section.
Costs of Compliance
The FAA estimates that this AD affects 623 airplanes of U.S. registry. The FAA estimates the following costs to comply with this AD:
| Labor cost | Parts cost | Cost per product | Cost on U.S. operators |
|---|---|---|---|
| 1 work-hour × $85 per hour = $85 | $0 | $85 | $52,955 |
The FAA estimates the following costs to do any necessary on-condition actions that would be required based on the results of any required actions. The FAA has no way of determining the number of aircraft that might need these on-condition actions:
| Labor cost | Parts cost | Cost per product |
|---|---|---|
| 1 work-hour × $85 per hour = $85 | $1 | $86 |
Authority for This Rulemaking
Title 49 of the United States Code specifies the FAA's authority to issue rules on aviation safety. Subtitle I, section 106, describes the authority of the FAA Administrator. Subtitle VII: Aviation Programs, describes in more detail the scope of the Agency's authority.
The FAA is issuing this rulemaking under the authority described in Subtitle VII, Part A, Subpart III, Section 44701: General requirements. Under that section, Congress charges the FAA with promoting safe flight of civil aircraft in air commerce by prescribing regulations for practices, methods, and procedures the Administrator finds necessary for safety in air commerce. This regulation is within the scope of that authority because it addresses an unsafe condition that is likely to exist or develop on products identified in this rulemaking action.
Regulatory Findings
This AD will not have federalism implications under Executive Order 13132. This AD will not have a substantial direct effect on the States, on the relationship between the national government and the States, or on the distribution of power and responsibilities among the various levels of government.
For the reasons discussed above, I certify that this AD:
(1) Is not a "significant regulatory action" under Executive Order 12866,
(2) Will not affect intrastate aviation in Alaska, and
(3) Will not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act.
List of Subjects in 14 CFR Part 39
Air transportation, Aircraft, Aviation safety, Incorporation by reference, Safety.
Adoption of the Amendment
Accordingly, under the authority delegated to me by the Administrator, the FAA amends 14 CFR part 39 as follows:
PART 39-AIRWORTHINESS DIRECTIVES
1. The authority citation for part 39 continues to read as follows:
Authority:
49 U.S.C. 106(g), 40113, 44701.
§?39.13 [Amended]
2. The FAA amends §?39.13 by adding the following new airworthiness directive:
2021-25-07 Bombardier, Inc.: Amendment 39-21850; Docket No. FAA-2021-0658; Project Identifier MCAI-2020-01582-T.
(a) Effective Date
This airworthiness directive (AD) is effective February 15, 2022.
(b) Affected ADs
None.
(c) Applicability
This AD applies to Bombardier, Inc., Model BD-100-1A10 airplanes, certificated in any category, serial numbers 20003 through 20780 inclusive.
(d) Subject
Air Transport Association (ATA) of America Code 32, Landing gear.
(e) Unsafe Condition
This AD was prompted by a discovery that a lockwire may not have been installed on the side stay actuator pin nut of the main landing gear (MLG). The FAA is issuing this AD to address a possible missing lockwire, which could result in loss of the nut, and if undetected, lead to the collapse of the affected MLG.
(f) Compliance
Comply with this AD within the compliance times specified, unless already done.
(g) Required Actions
Within 12 months after the effective date of this AD: Inspect the left-hand (LH) and right-hand (RH) MLG side stay actuator assembly pin nuts for presence of a lockwire, in accordance with paragraph 2.B of the Accomplishment Instructions of the applicable service information specified in paragraphs (g)(1) and (2) of this AD. If the lockwire is missing: Before further flight, install a lockwire in accordance with paragraph 2.C of the Accomplishment Instructions of the applicable service information specified in paragraphs (g)(1) and (2) of this AD.
(1) Bombardier Service Bulletin 100-32-36, dated June 25, 2020.
(2) Bombardier Service Bulletin 350-32-012, dated June 25, 2020.
(h) Other FAA AD Provisions
The following provisions also apply to this AD:
(1) Alternative Methods of Compliance (AMOCs): The Manager, New York ACO Branch, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, send your request to your principal inspector or responsible Flight Standards Office, as appropriate. If sending information directly to the manager of the certification office, send it to ATTN: Program Manager, Continuing Operational Safety, FAA, New York ACO Branch, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590; telephone 516-228-7300; fax 516-794-5531. Before using any approved AMOC, notify your appropriate principal inspector, or lacking a principal inspector, the manager of the responsible Flight Standards Office.
[top] (2) Contacting the Manufacturer: For any requirement in this AD to obtain instructions from a manufacturer, the instructions must be accomplished using a method approved by the Manager, New York ACO Branch, FAA; or Transport Canada Civil Aviation (TCCA); or Bombardier, Inc.'s TCCA Design Approval Organization (DAO). If approved by
(i) Related Information
(1) Refer to Mandatory Continuing Airworthiness Information (MCAI) TCCA AD CF-2020-52, dated November 30, 2020, for related information. This MCAI may be found in the AD docket on the internet at https://www.regulations.gov by searching for and locating Docket No. FAA-2021-0658.
(2) For more information about this AD, contact Elizabeth Dowling, Aerospace Engineer, Mechanical Systems and Administrative Services Section, FAA, New York ACO Branch, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590; telephone 516-228-7300; fax 516-794-5531; email 9-avs-nyaco-cos@faa.gov.
(j) Material Incorporated by Reference
(1) The Director of the Federal Register approved the incorporation by reference (IBR) of the service information listed in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.
(2) You must use this service information as applicable to do the actions required by this AD, unless this AD specifies otherwise.
(i) Bombardier Service Bulletin 100-32-36, dated June 25, 2020.
(ii) Bombardier Service Bulletin 350-32-012, dated June 25, 2020.
(3) For service information identified in this AD, contact Bombardier, Inc., 200 Côte-Vertu Road West, Dorval, Québec H4S 2A3, Canada; North America toll-free telephone 1-866-538-1247 or direct-dial telephone 1-514-855-2999; email ac.yul@aero.bombardier.com; internet https://www.bombardier.com.
(4) You may view this service information at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206-231-3195.
(5) You may view this service information that is incorporated by reference at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, email fr.inspection@nara.gov, or go to: https://www.archives.gov/federal-register/cfr/ibr-locations.html.
Issued on December 2, 2021.
Lance T. Gant,
Director, Compliance & Airworthiness Division, Aircraft Certification Service.
[FR Doc. 2021-28597 Filed 1-10-22; 8:45 am]
BILLING CODE 4910-13-P